Gt42R Or Bigger Pics

[shaneo_1]

just wondering if anybody has pics of there gt42 or bigger turbo on manifold and with wastegate,

detailed pics would be helpfuk, as I just recived my manifold and dosnt look like much room to add the 50mm wastegate

and 3 1/2" dump pipe round the back.

need help asap

thanks

[JETFPV]

Who made your manifold and what size turbo ?

[shaneo_1]

orderd it thorugh a fella in tassie, its a gt42r, with the 5" inlet

[XYZ]

Here is a pick of my GTX42 with twin gate setup.

I will try and get a photo for you with the 4inch dump attached shortly..

Ben

[JETFPV]

Ah k fair enough, just thought I'd ask that way people with similar manifold's and turbo's will reply, im using an ETM manifold, Turbosmart 60mm gate and ETM 4" dump, GT47-88, all fit's under the bonnet have no clearance issues, you wouldn't even know it was there...

It's a tight fit but it all goes in there...

[shaneo_1]

only clearnce issues I will have is fitting a 3.5" dump pipe and 2" wastegate pipe.

easiest way I can make it fit is make a 4" dump pipe and plump the wastegate straight in at 90deg bend at top of dump staright out of turbo housing

[shaneo_1]

XYZ turbo seems to sit closer to the head then mine does I believe, also more problem I have is the standerd power steering resivour

[micheal]

300.00 dollar eBay job? From Tassie

[AtomiCg6]

His a pic of my engine bay, Gt42 twin gates, etm manifold, fitted pretty well, didnt have to move of customize anything I dont think..

cheers johnny.

Edited 25/09/11 10:45 PM by AtomiCg6