Which Cooler/intake Kit Is Best Suited ?

[smXR6]

Whats the difference between the PW stage 2 and stage 3 cooler and same with the plazmaman 800hp and 1000hp cooler ?

which would be best to go ? is there any other major power difference between the 2 ?

[.BLKPHN.]

well the stage 3 can go to 1400rwhp hahah so if your only going small say 400+rwkwish then go stage 2 and save ya self some money

there are some xr6turbos running the 800hp and running 400+rwkw and the 1000hp isnt to much more in price and willget u to big numbers iv seen cars running 600+kw with them

so realy depends what you like look wise because I think they both are great coolers and both do the job your after

correct me if im wrong

[smXR6]

sweet as , thanks mate

[.BLKPHN.]

no worrys mate what power you looking for??

[smXR6]

no so much power but more drivabilty and so on , old f6 use to have 358kw and that was about the right power for good street car I think

[.BLKPHN.]

yer mate well either stge 2 pw cooler or 800hp plazmaman cooler will be good for ya

and if I was u go the pw 4inch air box as it has a better set up. bigger pod and battery relocated in boot

the plazmaman has the lil pod and battery in the box which im not a fan of

[smXR6]

yer that's why I liked the pw kit as it still use's standard battery and is relocated

[Trough Lolly]

Scott, youll find the new car will haul ass completely different to your old phoon...

The old phoon was sh*thouse in comparison with the boost curve, that old thing didnt have boost till near 4 grand due to the wastegate not being ported and the actuator problem.

350 with a properly tuned and ported turbo setup will rape the pants off the old 350 your used to!

[smXR6]

yer even mick said that what was letting it down the housing , yer should be pretty good once its all done still trying to decide whether or not to go a plenum aswell

[.BLKPHN.]

if you have the money for the plenum then go it but if not then its not really a big loss at that power level

but does look good