Jump to content

Recommended Posts

  • I see a red door and I want to paint it black
  • Donating Members
  • Member For: 15y 6m 10d
  • Gender: Male
  • Location: Far north queensland

So I was driving the other day and changed up a gear at full boost and then backed off a bit. I heard a bit of a PSSSHHH, wasn't to loud over the noise from the mirrors but I heard it. Since then I've had very little boost and powaar and when I back off all I hear is a short psshh and no more TU tu tu. Could this be from the blow off valve stuck slightly open - or more likely to be from one of the silicon joiners. Are these blow of valves serviceable?

I have a BF with the ZF box, Plazmaman piping and cooler, stock blowoff valve and running 16psi.

Link to comment
https://www.fordxr6turbo.com/forum/topic/67912-bosch-blowoff-valve-failure/
Share on other sites

  • Donating Members
  • Member For: 16y 5m 14d
  • Gender: Male
  • Location: SE Melbourne

I can tell u exactly what it is.

Check the pipe connecting to your throttle body. That rubber joiner either has melted, has a hole in it or came loose.

  • I see a red door and I want to paint it black
  • Donating Members
  • Member For: 15y 6m 10d
  • Gender: Male
  • Location: Far north queensland

I can tell u exactly what it is.

Check the pipe connecting to your throttle body. That rubber joiner either has melted, has a hole in it or came loose.

took that one off this arvo and couldn't see anything too wrong with it, also checked the joiner at the other end of that pipe and redid the hose clamps. Still got a leak, looks like the front bar and headlight will be coming off this weekend.

  • Donating Members
  • Member For: 16y 5m 14d
  • Gender: Male
  • Location: SE Melbourne

Damn, that's unlucky. I had the same thing as you happen to me and that tb joiner melted.

Do you have aftermarket piping? If so it could also be the one with the air flow sensor in it under the headlight.

Hope u find it soon

  • I see a red door and I want to paint it black
  • Donating Members
  • Member For: 15y 6m 10d
  • Gender: Male
  • Location: Far north queensland

thanks Paulie - Yeah plazmaman piping kit. I'll just go over every join on the weekend until I find something

  • Talks Cheap, Let's Race
  • Member
  • Member For: 18y 5m 20d
  • Gender: Male
  • Location: Atherton, FNQ

Hey sideways82, my mate has a f6 and said his stock blow off valve was playing up and he just sprayed some wd40 in it to free it up. I had mine off the other week and looking up the bottom you can see the piston sealing on the base, it should be all the way down and you should be able to push it up a bit, it has quite a strong spring behind it. I want to get a turbo smart kompact blow off valve to replace it soon.

  • I see a red door and I want to paint it black
  • Donating Members
  • Member For: 15y 6m 10d
  • Gender: Male
  • Location: Far north queensland

thanks phantom - I'll try that before the front bar comes off :beerchug:

  • Member
  • Member For: 15y 3m 12d
  • Gender: Male
  • Location: Townsville

if ya want to EJ you can chuck my BOV on and test it with that. I pulled it off the other week for something different. I can drop it off tonight if u want. just let me know

  • I see a red door and I want to paint it black
  • Donating Members
  • Member For: 15y 6m 10d
  • Gender: Male
  • Location: Far north queensland

hey carbz, I'm beginning to think it's a leak in one of the joins but if you could bring the blow off valve to IBS on sunday that would be sweet. I'm heading to cairns tonight.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
  • Create New...
'