Help & Advice

[Moose]

Hey all,

Looking for some info on the 'Regency Red' leather seats, factory in the Force 6 (if optioned).

My stock FPV F6 seats are falling apart (back left single seat), with the stitching coming apart at the sides and the lower back piece, looks like a loose belt-stud has pulled it out or something, either way it needs a full re-trim (because all the stitching is loose) or to be replaced with new ones, and I'll sell the standard seats as one back seat being f*cked.

My question is, can I buy the full set of Regency Red seats, or would it be cheaper and easier to re-trim my standard seats to match?

Photo attached for anyone who hasn't seen them

Cheers Mitch.

[Buf-Phoon]

I assume you have leather. My guess a re-trim will be cheaper. Don't know how successful you will be selling your current set with 1 seat farked.

I had custom leather done complete with FPV logos and trims for less than $2k

Hope this helps

[Moose]

No mine are currently Cloth, is this going to make getting them trimmed to leather any harder?

Under $2k for a retrim of all my seats sounds very affordable to me. This has helped, cheers!

Edit: The seats ive got left are still 2 good FPV front seats, and the rear twin seat is fine too, its just the single sucker that would need attention - im sure I'd sell just the front two seats to someone who would want to put them into some old ford to cover some costs of the seats.

Edited 26/11/09 12:43 AM by Buf-Phoon
quoting post directly above

[Buf-Phoon]

In answer to your question mine was a factory cloth to leather conversion. No worries at all even comes with airbag tabs

[Moose]

Sir, you have made my day! $2g give or take is a great price! Ill make some inquires today.

Edited 26/11/09 01:13 AM by Buf-Phoon
quoting post directly above