Cooler Measurements - Is It The Core Or End Tanks Included

[smXR6]

hey guys

hopefully someone can help here ,

when u see the measurements on sites such as rapid , plazmaman and process west is that just the core measurements or is tha the overall including endtanks ?

can get a 600x400x76mm(including end tanks)cooler 400x400x76 core from a mate

just need to no will the 600 wide fit

I cant seem to find any info when I search

and would anyone have pictures of a 600 wide cooler with the front bar off

cheers

[xr6turboman]

I think it would be the core ... the HDI cooler is 600 x 300 x 100 if I remember rightly and that fits fine..

[smXR6]

ok sweet

does the hdi one 600x300 measure from the core each side or end tank to end tank ?

[RSK]

My core's 510 wide, 410 high

Thinnest point is right at the top around 590mm wide, in the middle it's around 610mm wide (where it fits between the intrusion bar)

[smXR6]

My core's 510 wide, 410 high

Thinnest point is right at the top around 590mm wide, in the middle it's around 610mm wide (where it fits between the intrusion bar)

so your core is 510x410 , whats the size including end tanks do u no ? do u have any pics installed mate ?

[RSK]

780mm

It's just the standard size cooler people are throwing on, and not the biggest either.

If you want pics of it with the bumper removed have a look on the plazmaman site

[smXR6]

780mm

It's just the standard size cooler people are throwing on, and not the biggest either.

If you want pics of it with the bumper removed have a look on the plazmaman site

cool so the 600mm wide including entanks should fit easy if your one is 780mm wide

cheers mate