Jump to content

Recommended Posts

  • Member
  • Member For: 17y 5m 15d
  • Gender: Male
  • Location: Northside Brisbane
Posted

hey guys, new to the forum..

ive got a 2005 bf xr6t ute

performance modifications so far are-

v1.0 rapid systems intercooler kit

plazmaman underbattery air induction with pod

custom tune from RDP on 9 psi making 349rwhp/260rwkw

*have recently removed centre muffler, purchased bosch 044

*very soon have 60lb injectors, high flow cat, hotside piping

*possibly a 4inch dump later down the track though

What power figure should I be expecting with this setup?

300rwkw-350rwkw????

Do I need a bigger actuator/flapper etc to retain boost pressure?

  • Forged Member
  • Legacy Donating Member
  • Member For: 19y 7m 11d
  • Gender: Male
  • Location: SW Sydney
Posted

You may crack 300 or so, but you'll need the actuator/flapper mod to hold boost properly when you upgrade the dump pipe. Also, your stock exhaust will become a restriction over 300

Good luck and keep us posted on the results, don't chase a figure, just get the car tuned so it performs how you want it.

  • Member
  • Member For: 17y 5m 15d
  • Gender: Male
  • Location: Northside Brisbane
Posted

cheers mate, looks like u making some great power? what modifications have you done and what psi are you running at?

with the actuator/flapper mod what is involved in it and what $ range should I expect?

  • Forged Member
  • Legacy Donating Member
  • Member For: 19y 7m 11d
  • Gender: Male
  • Location: SW Sydney
Posted

Thanks bud, don't make me list the mods though - I'll remember how much money I spent before I was getting advice and learning from the forum! <_< I'm running a peak of 19psi at the moment, pretty nuts!

The flapper and actuator should be around say $450, but that wouldn't include pulling the turbo off and re-fitting, your best bet would be to have a chat to your preffered tuner (hopefully a site sponsor) and they should beable to work out a full package.

Try and do as much as possible in one hit, otherwise you may be paying more in the long run. Don't worry about the final figure either, if it drives the way you want, be happy!

  • Member
  • Member For: 18y 1m 28d
  • Gender: Male
  • Location: Melbourne
Posted

Youv'e got some nice power so far 300rwkw should be easily achievable. Your luck you got the BF and not the BA, get better valve springs in the BF

  • Member
  • Member For: 17y 5m 15d
  • Gender: Male
  • Location: Northside Brisbane
Posted

cheers mate... yea was happy with that tune.. with only the intercooler,piping and ubi. What power are u making atm?

  • 2 weeks later...
  • Legacy Donating Member
  • Member For: 18y 3d
  • Gender: Male
  • Location: port hedland
Posted

I rekon ull get 311.45

have we got a result??

  • Member
  • Member For: 17y 5m 15d
  • Gender: Male
  • Location: Northside Brisbane
Posted
I rekon ull get 311.45

have we got a result??

SLO BA? lol wont be geting a tune until my tax return... thou will def post up when I do

  • 5 months later...
  • Member
  • Member For: 17y 5m 15d
  • Gender: Male
  • Location: Northside Brisbane
Posted

hehe I got 461rwhp/343rwkw on only 13psi :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...