Calculating Your Fuel Injector And Fuel Pump Requirements

[trbo 6]

Sorry for the multiple posts but I can't edit any of my previous posts for some reason. The fuel pump at 6500rpm will need to flow 582lb/hr which means that the a1000 will be to small.

At 86 psi, the Aeromotive A1000 will flow approximately 550lb/hr of fuel at 13.5 volts. Lets plug in those numbers: (550 / .9) / .6 = 1018.52

This formula should read (550*0.9)/0.6 = 825hp @86psi.

[tsammons]

HI Im going for 300 - 320 RWKW

Will these injectors do me?

http://www.ebay.com.au/itm/BOSCH-440cc-FUEL-INJECTORS-FORD-FG-XR6-TURBO-UPGRADE-/370626828941?pt=AU_Car_Parts_Accessories&hash=item564b149a8d&_uhb=1#ht_2379wt_1163

Had the Bosch 968's on the BA

[F1PERFORMANCE]

injector flow app by efi hadware is very good try it and you will have your answer

[tsammons]

injector flow app by efi hadware is very good try it and you will have your answer

MMMMM thanks for that ! It seems I need to go for something bigger for future needs

Can anybody tell me if these will be a direct fit for FG xr6 turbo? and what connector I should choose?

http://www.ebay.com.au/itm/SIEMENS-DEKA-80LB-835CC-FUEL-INJECTORS-EV1-EV6-USCAR-/230791220059#ht_1421wt_1399

Thanks all

[Impellor]

Will not fit FG, full stop (too long).

Cheers

[tsammons]

Thanks Impellor

Saved me pushing the buy it now button !!

Any chance of some part numbers or links to fg xr6 turbo injectors ? Around the 80lb mark?

Thanks again

Cheers

Tom

Edited 29/12/12 10:03 AM by tsammons

[BRK]

It is an old thread but here is something from Ford racing on Injectors and pumps - worth a read IMO and really does back up the first post.

www.fordracingparts.com/download/.../ProperlySelectingEFIComp.pdf‎