cobrav8 Member 1,969 Member For: 21y 5m 26d Gender: Male Location: New Zealand Posted 27/02/08 02:36 AM Posted 27/02/08 02:36 AM Can anyone tell me what the stud pattern and offset for an average set of mags for an XR is please?Would these fit http://www.trademe.co.nz/Trade-Me-Motors/C...894520.htm?p=15
xr6turbonewbie Member 56 Member For: 18y 10m 24d Gender: Male Location: Hunter Valley NSW Posted 27/02/08 02:49 AM Posted 27/02/08 02:49 AM ba offset is positive 36. the add you linked to states 38 offset
exarsixturbo Dr. Speed Member 784 Member For: 19y 1m 18d Gender: Male Location: The land of Politicians, Public Servants, Porno & Pyrotechnics Posted 27/02/08 03:49 AM Posted 27/02/08 03:49 AM Stud pattern - 5 X 114.5Offset is positive 36
cobrav8 Member 1,969 Member For: 21y 5m 26d Gender: Male Location: New Zealand Posted 27/02/08 07:42 AM Author Posted 27/02/08 07:42 AM Stud pattern - 5 X 114.5Offset is positive 36So is that stud pattern really .02mm different - or is there some rounding? The Offset - would that mean that the wheels would stick inward too far and hit the top suspension arm - or stick out slightly further? Would they fit?
coach3062 Member 91 Member For: 20y 7m 12d Gender: Male Location: North west NSW Posted 27/02/08 08:01 AM Posted 27/02/08 08:01 AM So is that stud pattern really .02mm different - or is there some rounding? The Offset - would that mean that the wheels would stick inward too far and hit the top suspension arm - or stick out slightly further? Would they fit?Falcon stud pattern is 5 x 114.3 pcd (pitch circle diameter)Offset for AU-BF sedans is +36, so +38 is a tiny difference that means they will be wider inwards (towards the brake disc) by 2ml.
coach3062 Member 91 Member For: 20y 7m 12d Gender: Male Location: North west NSW Posted 27/02/08 08:06 AM Posted 27/02/08 08:06 AM Just remembered, check the centre hole diameter. You may need a fitting ring to make them hub-centric (they should sit on the centre ring for support, not on the studs). I can't remember the standard centre diameter.
cobrav8 Member 1,969 Member For: 21y 5m 26d Gender: Male Location: New Zealand Posted 27/02/08 09:04 PM Author Posted 27/02/08 09:04 PM Thanks for that - I have asked for a measurement on these wheels, and will measure one of mine.
exarsixturbo Dr. Speed Member 784 Member For: 19y 1m 18d Gender: Male Location: The land of Politicians, Public Servants, Porno & Pyrotechnics Posted 27/02/08 09:33 PM Posted 27/02/08 09:33 PM So is that stud pattern really .02mm different - or is there some rounding? The Offset - would that mean that the wheels would stick inward too far and hit the top suspension arm - or stick out slightly further? Would they fit?Whoops - sorry that meant to read 5 X 114.3 I reckon those wheels would fit fine. They are only 18 x 8.5's and the offset should be ok. I have 20 x 8.5 on the front and they don't scrub or rub on anything. Not sure of the offset however.
castro7 rob327 Member 227 Member For: 18y 6m 5d Gender: Male Location: Sydney NSW and Bribie Island QLD Posted 13/03/08 02:23 PM Posted 13/03/08 02:23 PM I have 20 x 8.5 on the front and they don't scrub or rub on anything. Not sure of the offset however.I didnt think to check forums, but I got 18 x 8s with a 35 offset because I was worried the 8.5s wouldnt fit given the sfa clearance on the inside
IH8TOADS Legacy Donating Member 3,618 Member For: 21y 2m 11d Gender: Male Location: OZ Posted 16/03/08 05:03 AM Posted 16/03/08 05:03 AM +38 with 20x8.5 have rubbed (front) on one xr6t and not on another.....I think it's touch and go. Best sticking with a +35 (with 8.5" wide rim) offset for the front as these are common and fit fine.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now