Supply your own dash mate. Sorry I dont have any pics of red as I have never done one in red.

Matt

Ok, I'll have a think about it. Where abouts in Melb are you?

Rebirthing an old thread here, but Thalamus do you know that you speedo is going to be out after 100kmh and your tacho will be out also.

I have done some extensive work on modifying ba/bf clusters of late, which includes fixing speedo/tacho accuracy with fascia changeover, turning on a digital speedo etc. Some require reprogramming of the cluster eeprom while others can be done while in the car.

If you want any more info let me know

Matt

Do you loose the DTE if you have the Digital Speedo Mat?

You have DTE on the left and Speedo on the right.

Rebirthing an old thread here, but Thalamus do you know that you speedo is going to be out after 100kmh and your tacho will be out also.

I have done some extensive work on modifying ba/bf clusters of late, which includes fixing speedo/tacho accuracy with fascia changeover, turning on a digital speedo etc. Some require reprogramming of the cluster eeprom while others can be done while in the car.

If you want any more info let me know

Matt

Thanks Matt - yeah realised that when putting it together, but I haven't worried about it too much as speedo on mine becomes inaccurate over 120, and I don't do that speed anyway. Never really watch my tacho anyway - I have an auto non-turbo car at the moment!

Even if I don't go ahead and fix it properly, I'm interested in knowing more about it!!!

Thanks

-T.

To change these settings you need to dismantle the cluster, read the eeprom via a serial reader , change a couple of bytes in the eeprom and write it back.

Matt

Haha! Well beyond me and my soldering iron I'm afraid!!! Good to know it can be done though!

And it took me a good couple of months to sort through alot of the data, and we are only about 1/4 of the way through the cluster alone.

Geez. Well good luck mate! Look forward to hearing more about it in the future!