Wsid 14/3

[MUZ580]

Ive got a rip shifter and it doesnt help much, but I can flat change 2 -3 faster... its the launch that hurts my time

←

2.6 60ft is pretty ordinary but to get a 13.7 from that start must mean you can change pretty quick.

I managed a 2.06 60ft but only ended up with a 13.9 cause I cant get the 2-3 change right. that's with a T5 though.

[F6BF]

Any of u guys out wed at wsid see what MADGTP run?

Blown boss

http://www.cacklingpipesphotography.com/07...t070307_054.jpg

[DBOSS]

Any of u guys out wed at wsid see what MADGTP run?

Blown boss 

http://www.cacklingpipesphotography.com/07...t070307_054.jpg

←

Yeah its got 360rwklw and best was 13.1

[Guest]

Any of u guys out wed at wsid see what MADGTP run?

Blown boss 

http://www.cacklingpipesphotography.com/07...t070307_054.jpg

←

Yeah its got 360rwklw and best was 13.1

←

What rubber was on the rear, it looks like it got the power down in that pic but 36orwkw and a half decent launch would see a low 12 atleast.

[F6BF]

Auto or manual?

Tracktion problems if its a manual?......going by the pics there appears to be some sort of motorsport tyres on the rear

[Guest]

Auto or manual?

Tracktion problems if its a manual?......going by the pics there appears to be some sort of motorsport tyres on the rear

←

It's throwing it's weight quite well in that pic so it appears to have grip.

[ford number 1]

Ive seen this car at on the road and im sure its a manual.I know that Intune has bought some BF Drag Radials lately from the states,maybe MADGTP had a set of them on the rear..

[RAP1D]

Ive got a rip shifter and it doesnt help much, but I can flat change 2 -3 faster... its the launch that hurts my time

←

2.6 60ft is pretty ordinary but to get a 13.7 from that start must mean you can change pretty quick.

I managed a 2.06 60ft but only ended up with a 13.9 cause I cant get the 2-3 change right. that's with a T5 though.

←

Accualy it is better than the stock shifter, so yeah, must be helping... I fogot how bad the stock shift is when you try to do it fast.

Just found this pic of my lame launch lol

[MUZ580]

Ended up being a pretty good night and I am stoked cause I got the time I wanted.

I still had issues with gear chaging and the 2-3 change. I'll be putting in a ripshifter before I head out again and hopefully I'll hit low 13's.

Times as follows:

15.370 @ 98.17 2.556 60ft

14.616 @ 101.58 2.222 60ft

14.254 @ 102.29 2.203 60ft

13.986 @ 103.67 2.139 60ft

13.502 @ 103.25 2.091 60ft

I saw 3 other T's out there, 2 autos and a manual ute which ran a 14 flat.

Looking forward to the next time I head out and hopefully we can get a whole bunch of us and get a private land.

A few Vids attached.

[MUZ580]

Ended up being a pretty good night and I am stoked cause I got the time I wanted.

I still had issues with gear chaging and the 2-3 change. I'll be putting in a ripshifter before I head out again and hopefully I'll hit low 13's.

Times as follows:

15.370 @ 98.17 2.556 60ft

14.616 @ 101.58 2.222 60ft

14.254 @ 102.29 2.203 60ft

13.986 @ 103.67 2.139 60ft

13.502 @ 103.25 2.091 60ft

I saw 3 other T's out there, 2 autos and a manual ute which ran a 14 flat.

Looking forward to the next time I head out and hopefully we can get a whole bunch of us and get a private land.

Funniest part of the night was my mate on a CR500 2 stroke dirt bike pull a 13.7 @ 97mph!