hi guys just got home from the wsid drags at eastern creek

had a great night saw a rotor do a 9.5 150 odd mph was a crappy start

there were quite a few 6t,s and v8 ba,s I spoke to one who is a member of this

forum who was more than happy to have a chat about the t,s and my progress

through mods I think he did a 13.2 but wasnt the best conditions

my boss and two other people I work with had there rotors out to see who is

the fastest in the factory they did high 14s one was a 13b turbo the other was a

batmobile twin turbo I think next week when I take my bf they might be a bit

suprised when I pull a high 14 low 15 standard I hope.

You should be able to pull a low 14

Only 4 T's

1 XR8

We all had a chat at one time or another.

and it was a 13.199 107.44mph

hi guys just got home from the wsid drags at eastern creek

had a great night saw a rotor do a 9.5 150 odd mph was a crappy start

there were quite a few 6t,s and v8 ba,s I spoke to one who is a member of this

forum who was more than happy to have a chat about the t,s and my progress

through mods I think he did a 13.2 but wasnt the best conditions

my boss and two other people I work with had there rotors out to see who is

the fastest in the factory they did high 14s one was a 13b turbo the other was a

batmobile twin turbo I think next week when I take my bf they might be a bit

suprised when I pull a high 14 low 15 standard I hope.

Hit the full stop button dude and take a breath!

Sorry about no punctuation on my post.

Anyway I had a great time. was my first time at wsid and im sure it wont be my last.

According to the announcer they were all XR8's

I was there from 6-8pm and there was a green & blue XR8, and a white, orange, and blue turbo. Which one got the 13.199?

I would have thought there were more T's out there? I would have run but I haven't got a helmet yet. Anyone know where to get a cheap helmet? Do they have to be full face?

Next week I will be there.

Edited 29/03/06 11:02 PM29/03/06 11:02 PM by fill

Fire that announcer asap!

hi guys just got home from the wsid drags at eastern creek

had a great night saw a rotor do a 9.5 150 odd mph was a crappy start

there were quite a few 6t,s and v8 ba,s I spoke to one who is a member of this

forum who was more than happy to have a chat about the t,s and my progress

through mods I think he did a 13.2 but wasnt the best conditions

my boss and two other people I work with had there rotors out to see who is

the fastest in the factory they did high 14s one was a 13b turbo the other was a

batmobile twin turbo I think next week when I take my bf they might be a bit

suprised when I pull a high 14 low 15 standard I hope.

Hit the full stop button dude and take a breath!

he was excited dan give him a break bro

I would have thought there were more T's out there?  I would have run but I haven't got a helmet yet.  Anyone know where to get a cheap helmet?  Do they have to be full face?

Next week I will be there.

I'm pretty sure that the helmets don't have to be full face - just so long as they are standards approved.

From the 2001-2002 ANDRA rule book (I don't have the latest with me)

AS(Australian Standard) 1698 197/1988

SNELL (US) SA85, SA90, SA95, SFI31.2, M85, M90, M95, SFI41.2, 1985/1990/1995, SFI31.1

BS (British Standard) 6685-85 Type A, 2495, 1977

Most motorcyle retailers have good ranges of helmets. Places like Motorcycle Accesories Supermarket (MCAS) or if you are in the Campbelltown area go see Joe at Campbelltown Motorcycles in Blaxland road (Gratuitous plug for one of my dragsters sponsors )

Just go down to your local cash converters and purchase an open face motorbike helmet that's australian Standards approved. Should set you back 30 or 40 bucks