Ba Sohc V8 Performance Upgrades

[DavoXT]

Can someone help me out here, iam chasing some figures on kw and torque of a stock ba xt manual sohc V8 and what the apx figures would be after some performance upgrades.

I now have a kn air filter with the extra snorkel in the air box, helix spacer, twin 2.5" manta exhaust,pacemaker extractors.

Next step is a custom tune, I have e-mail three tuners but none can give me any apx figures, they just say 3v improves will with a edit.

Has anyone already done these upgrades and can help me out with some figures.

[F6 RAPID]

Mate, the problem you will find here that this is dedicated to turbo's - hence the name......

Try Ford Forums, it may help.

[rs2000]

Can someone help me out here, iam chasing some figures on kw and torque of a stock ba xt manual sohc V8 and what the apx figures would be after some performance upgrades.

I now have a kn air filter with the extra snorkel in the air box, helix spacer, twin 2.5" manta exhaust,pacemaker extractors.

Next step is a custom tune, I have e-mail three tuners but none can give me any apx figures, they just say 3v improves will with a edit.

Has anyone already done these upgrades and can help me out with some figures.

<{POST_SNAPBACK}>

try Aussie Car Enhancements in melton victoria..there doing great things with 3v.

[Falchoon]

Or try Herrods. If it's a V8 Ford, Rob is sure to have played with them before.

[Venom XR6]

There's a few guys playing with the 3V on FF. Knocking on the door of 12's with just bolt ons and an edit.

[ktford]

Fair suck girls, Davo has been around here for donkeys years, one of the first to modify his BA. I know a lot of guys have done their XR8's up Dave, maybe try Pattens/Brattons or whomever Hypnodoc uses over in WA

[Trough Lolly]

theres a sohc 220kw V8 ute here in mildura.

his only mods are cat back remus exhaust, edit, and 100hp dry nos!

on the rollers he span up 268rwkw and shocked the croud at the dyno show cuz his ute is decked out with ladder bars,roof rails, and toolbox's haha..

[Xtreme F6]

Fair suck girls, Davo has been around here for donkeys years, one of the first to modify his BA. I know a lot of guys have done their XR8's up Dave, maybe try Pattens/Brattons or whomever Hypnodoc uses over in WA

hypnodoc uses me and yes the 3 valves are quite good when editted ect, they make good torque.

[XtRmn8]

Aussie Car Enhancements have developed a kit for the SOHC V8. From memory their car had around 168kwrk stock and now has about 240rwkw. The entire kit is around $4400.

[Xtreme F6]

Aussie Car Enhancements have developed a kit for the SOHC V8. From memory their car had around 168kwrk stock and now has about 240rwkw. The entire kit is around $4400.

far out that sounds