Jump to content

Best Mods For New Xr6t Ute


Recommended Posts

Guest turbomick
  • Guests
Posted

Just bought a 2004 xr6t ute, blueprint, leather,prem sound, what mods would u guys recommend first, budget 2-3 grand

  • Member
  • Member For: 22y 5m 17d
  • Location: Sydney
Posted

you sure have come to the right place!

do a search mate there's heaps of info here,start with the following.

cold air intake

BMC filter

mod the cat

Capa edit

Eugene injectors

  • loitering with intent
  • Legacy Donating Member
  • Member For: 23y 1m 6d
  • Gender: Male
  • Location: Zombie Birdhouse
Posted
you sure have come to the right place!

do a search mate there's heaps of info here,start with the following.

cold air intake

BMC filter

mod the cat

Capa edit

Eugene injectors

<{POST_SNAPBACK}>

BFYB , do a search on Geea and Eugenes mods. Been here for a while and they get my vote if you want to be an active participant. Drive in drive out , do a search on APS or Nizpro :thumbsup: .... or dare I say it an EDIT with a custom tune

  • Member
  • Member For: 22y 5m 17d
  • Location: Sydney
Posted

or dare I say it an EDIT with a custom tune

should be safe to say that here mate,it is the Capa section.

  • Seriously Flukey Member
  • Legacy Donating Member
  • Member For: 22y 6m 4d
  • Gender: Male
  • Location: Melbourne
Posted
you sure have come to the right place!

do a search mate there's heaps of info here,start with the following.

cold air intake

BMC filter

mod the cat

Capa edit

Eugene injectors

This is pretty much what I will be doing and it should get you 60+ rwkw's.

  • Legacy Donating Member
  • Member For: 22y 7m 24d
  • Gender: Male
  • Location: brisbane
Posted

where abouts are you located... if you want to see how a ute goes with the edit and your in brissie... Pm me :talktohand:

  • Legacy Donating Member
  • Member For: 23y 2m 29d
Posted
where abouts are you located... if you want to see how a ute goes with the edit and your in brissie... Pm me :talktohand:

Show off. :thumbsup:

  • Legacy Donating Member
  • Member For: 22y 7m 24d
  • Gender: Male
  • Location: brisbane
Posted
Jet who what when and where? now I have boost wana go edit!!

If your keen just pm me... we can work out a time to suit :spoton: as long as it isnt this weekend :w00t2:

  • Wanabe mechanical engineer
  • Legacy Donating Member
  • Member For: 22y 8d
  • Gender: Male
  • Location: At the computer, obviously.....
Posted

Eugenes injectors, PM him and you will get them for under 500.

2500 left to spend.

CAI - 40 up to 200 dollars depending on what/where you get it (how much does nizpro's entire intake plenum cost? This could be an option, apparently the driveability increase is just out of this world).

So still over 2000 to spend.

Edit, 1300. Tune, 500 ish. 1800 all up.

500 to spend.

How much is a hi flow cat? Probably close to 300 or thereabouts. And the cats are really the only restriction in the stock exhaust untill around 300rwkw. So this is money well spent for sure.

And you have some change left over.

Theres an example of how to spend 2800 roughly. That would probably end up being roughly 12psi and around about the 270 - 280kw mark...

I'm sure martin could improve on this, and/or find you a good deal. Ring around nizpro, aps etc and find out what there intercoolers are going for as well. I'm sure in 6 months time you would want to gain another 10 or so kw, and an intercooler would probably allow for this.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...