Jump to content

Recommended Posts

  • Member
  • Member For: 22y 6m 27d
Posted

Have to replace my original Dunlops. Am looking at updating to 18" wheels and Nankang NS2 in 235 x 18".

Any one else running these tyres?

Are they quieter than the Dunlops which I find noisy on some surfaces.

All opinions appreciated.

  • Replies 44
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

  • TRAITOR
  • Legacy Donating Member
  • Member For: 23y 11m
  • Gender: Male
  • Location: Townsville, NQ
Posted

Can't comment on the Nankangs.

But I can recommend Nexen N3000s as a cheap tyre.

Silica compound across the range. The NS2s have silica in 18" and up.

  • Legacy Donating Member
  • Member For: 23y 7m 21d
  • Gender: Male
  • Location: Melbourne
Posted

I find them to be a great tyre. With 330 odd rwkw in the ute that actually provide great traction in a straight line, they are not noisey and wet weather performance is fine too.

  • Member
  • Member For: 22y 7m 14d
  • Location: sydney
Posted

If you are from Sydney go to tempe tyres and they will have them for $175 each.

At that price you can't go wrong for a silica based tyre.

  • Member
  • Member For: 21y 11m 4d
  • Gender: Male
  • Location: Newcastle NSW
Posted

I have the Nankangs on my T. they are 245/40/18". I have had them on for a month and they dont seem very noisy at all. I had bridgstones on last set and on the highway they made a ringing noise on the road. (they were very bald though and lots of fun!). The Nankangs seem ok nothing special, their profile looks visually more than the bridgstones but they were 235/40/18". All in all they were the cheapest set of 245's I could find they cost $200 per tyre. I have no other info for you

MG

  • Seriously Flukey Member
  • Legacy Donating Member
  • Member For: 22y 5m 29d
  • Gender: Male
  • Location: Melbourne
Posted
I find them to be a great tyre. With 330 odd rwkw in the ute that actually provide great traction in a straight line, they are not noisey and wet weather performance is fine too.

I guess these come in the wheel/tyre packages from Tempe. I am happy to get the rims from Tempe but was not all that confident on their tyres. Makes me feel a little more confident in ordering one of their packages now.

  • 570Nm @1800rpm
  • Legacy Donating Member
  • Member For: 22y 11m 28d
  • Gender: Male
  • Location: Perth, WA
Posted
I find them to be a great tyre. With 330 odd rwkw in the ute that actually provide great traction in a straight line, they are not noisey and wet weather performance is fine too.

I guess these come in the wheel/tyre packages from Tempe. I am happy to get the rims from Tempe but was not all that confident on their tyres. Makes me feel a little more confident in ordering one of their packages now.

Hey guys!!

I also got a packege from tempe, 18 inch rims with the 235 Nankangs!! I cant fault them they have been great so far. They are not noise at all and they seem to be wearing well! I recon these will last me at least 40000kms! :crybaby:

.............but by then 2 years would have passed and the new Falcon will be out and I will be 24 and insurance wont hurt as much and I will be earning a lot more mulla and most of all, the time would have come to trade the Fairmont in on something that will hopefuly have a 6.2 litre alloy V8 and 6 gears with no diff cluck!! :pinch:

BTW the Nankangs are great, you cant go wrong for what you pay for them!!

There was a 3 page tread on the Australian LS1 Forum not too long ago and the boys there all had positive things to say about the Nankangs!

  • TEAM BA
  • Legacy Donating Member
  • Member For: 21y 9m 11d
  • Gender: Male
  • Location: North of The Bridge
Posted

Nankangs are a cheap tyre, for day to day traffic they are good, if you want to get a little adventurous you might want to watch it as they dont have a very good reputation for there handling.

  • Member
  • Member For: 22y 5m 2d
  • Gender: Male
  • Location: Gold Coast
Posted

I only went the 235/40-18 option because it is closer to the rolling diameter of my 17" spare. Where as the factory fitted 18" have 245s fitted.

Shane.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.



×
×
  • Create New...