As some of you know our turbo has been running xede computor system.

The time has come for a change in the computer area.

We decided to have steve from redcliffe dyno and preformance fit his rdp comduter system 968 bosch injectors today.

Although we had been running a high power level before the difference in the car tonight is just awsome.

At the moment it has about 285rwkw's but will be going higher as we have found out that the watse acuator and blow off valve are both faulty and bledding off boost which is reducing the power gain.

The 285 rwkw's was produced with the boost starting at 15psi but because of the probelms I mentioned it bleed down to 10 psi but it was at this point it produced the 285 rwkw's.

when the new parts are fitted[busy xmas for me]steve will retune it to about 300 rwkw's as this where we will stop until we rebuild the motro at a later date.

the mods at this stage are 3.5 inch exhaust,ss throttle body,ss cold air intake,but standard intercooler.

Thanks to steve,gillian and there staff for the great effort today and for making goldie drive like a new car today.

And to the guys going on the criuse on the 28th if the new parts turn up you will see a master at work retuning our car while we are on the cruise. :lol:

Ian.

sounds tough

As some of you know our turbo has been running xede computor system.

The time has come for a change in the computer area.

We decided to have steve from redcliffe dyno and preformance fit his rdp comduter system 968 bosch injectors today.

Although we had been running a high power level before the difference in the car tonight is just awsome.

At the moment it has about 285rwkw's but will be going higher as we have found out that the watse acuator and blow off valve are both faulty and bledding off boost which is reducing the power gain.

The 285 rwkw's was produced with the boost starting at 15psi but because of the probelms I mentioned it bleed down to 10 psi but it was at this point it produced the 285 rwkw's.

when the new parts are fitted[busy xmas for me]steve will retune it to about 300 rwkw's as this where we will stop until we rebuild the motro at a later date.

the mods at this stage are 3.5 inch exhaust,ss throttle body,ss cold air intake,but standard intercooler.

Thanks to steve,gillian and there staff for the great effort today and for making goldie drive like a new car today.

And to the guys going on the criuse on the 28th if the new parts turn up you will see a master at work retuning our car while we are on the cruise. :lol:

Ian.

Good work Steve and Ian.

Looks like I won't be looking at you in the rear view on the next cruise.

Nice one Ian!

How do you think the auto will hold up?

well done boys interesting like to know more about the rdp and its workings features etc.

Thanks guys yes phil I will be in front I hope.LOL

Dynowog I do not know much about how it all works but I do know that it is a full seqancual injection set up fully programable while driving with steve's laptop like the ems you use.

HE actually did this with my wife in the car yesterday just to trim it abit until the new parts arrive.

It has controls for nos,and other things if wanted.

Ian

Well done Ian, I hope the new bov and actuator give you a nice power increase again. Looks like someone will be having fun this Christmas.

Very well done Ian .. and I would expect no less of Steve and RDP ... the man's a legend!

are you selling your xede and old injectors? if so how much.. hehe

Hey Goldie

A little more power for Geea's trip up north in the new year.

A very quick cruise is on the cards for after Xmas.

Well done on the new mods and keep us posted on the gains with the new parts.

Merry Xmas and keep the rubber on the road this festive season.

Good Luck

Regards

Steve

Good on ya Ian, I'm sure you'll let us know how it goes