Search the Community
Showing results for tags 'electrics bem fault icc'.
Found 1 result
-
Hi forum members, I have an xr6t with just over 100k km on clock. it hasnt been driven for 2 years, only started and moved a couple of times in the 2 years. The last start was about 7 months ago. When I went to put it back on the road last week, it wouldnt start. The symptoms were no power getting to the fuel pump (as you can usually hear it prime up), and also the radio wont work, nor the interior fan and electric seat doesnt move. The icc displayed graphics but didnt show any change when a/c or audio buttons pressed. Lastly, the trip meter display shows normal odometer but things like km/l and range have reset to zero. Horn dead. All these things were operating normally before. So, we painfully traced the wiring loom from the engine bay fuse box back across the radiator to the passengers side, thru the inner guard to where it re-enters the engine bay at the passengers side rear corner near the ABScontroller. We found that a rat had chewed the wiring loom and munched out the brown wire which sends signal from the ecu back to the fuse box. We repaired that and any other wire which looked at all imperfect, then reassembled. Car starts!!! BUT, the audio is still whacked up. Same faults except we now find that holding down 2 or3 radio buttons at the same time will make the radio sorta work, but its really odd. Touching the AC button changes stations, CD FM and AM indicators are all on at the same time, fan only blows on low speed. Touching various radio/climate buttons brings all sots of strange markings onto the screen (mono). It does weird computer kinda strange things. Horn dead, seat dead. Numbers are back on the trip meter for range etc. There appears an "E" in the right top of icc. This will test you. Appreciate any ideas thanks
