Jump to content

Bolly

New Member
  • Posts

    6
  • Joined

  • Last visited

Reputation

0 Neutral
  1. I've found the solution.. Took me a while after looking at Tiperformance Web site over and over.. The BF Turbo map sensor is compatible with the FG, but uses the standard FG NA plug.. Tiperformance are selling ba, bf turbo map sensor for NA ba and bf xr6 with the plug supplied, ready to solder to your NA BA, BF loom. Looking at their plug closely, it's the same as my NA fg plug.. That's why Tiperformance are saying a na fg plug will plug straight in.. Only if I use a ba or bf Turbo map sensor.. A fg turbo map SENSOR is Unless I find a genuine fg turbo plug, which is nearly impossible.. Cheers
  2. Thanks, but it needs to be sealed from moisture.. Hard wiring is too fragile.. I'll see if Tiperformance have got the right plug on Monday..
  3. I did look at that, the na plug has a oval shape where the 2 bar plug is rectangular, plus the pins are also off set to one side and the na plug pins are in the middle.. I'll see if Tiperformance sells the rectangular plug on Monday.. Hey, thanks for your input 👍😊
  4. Problem is no Car wrecking yard will cut the plug that I need from their loom..
  5. Thanks for the reply.. I ordered a plug with Tiperformance last night and when Tiperformance said that I didn't need one for a FG, I was confused.. I sent a reply to Tiperformance today explaining it is different but no reply as yet.. Probably closed for the weekend.. Is there anywhere I can order in the correct plug? Cheers
  6. Hi all.. I txted Tiperformance about a convertion cable to connect my NA loom connecter to a 2 bar Turbo Map Sensor.. Tiperformance replied that I didn't need one, and that my loom connector should fit... So basically, I unplugged my standard 1 bar na map sensor and replaced it with a FG Turbo 2 bar Map Sensor and the NA loom connector won't mount the 2 bar Map Sensor.. Any help would be appreciated.. Cheers
×
  • Create New...
'