G6e Turbo

[Eurimee]

Hi all,

My 2010 G6e turbo cuts back to idle while accelerating after turning or from standing start. Will not rev. up after that, then eventually dies. Only way to get going again is to turn motor off, wait 10 minutes, starts up and runs as if nothing happened, until next time???

Done the replace Battery thing,(seems to be the usual first step??), had it on the dyno last week, nothing came up. Has cut out again three times in the last two days. Temp gauge reading below half way but I am now suspecting it may be a faulty sensor, daytime temperature at the moment is in the mid 30's

Any suggestions would be appreciated.

[crazyxa]

Any fault codes logged?