Front Runner's

[Justa6]

hi all. was wanting to know what back space and width people use for their front runner's, over standard ba brake's. I've even seen 15" chaser's chopped down. any info would be great. cheer's

Edited 19/01/11 09:43 AM by yeahyo

[DjGsTa]

wouldnt mind knowing this either

[IceMyButt]

Convo pro's with a 3 3/8 inch backspace fit I think

[Slash]

Weld Pro Stars fit over stock BA Front Brakes in the following specs:

15 x 4.5"

5 x 114.3pcd

3.5" Backspacing

Ran them on my BA Ute & a mate's FG Ute with no modification to the brakes (other than putting the standard sh*tters on in place of the Brembo's).

[MexicanBatman]

I seen a 10 second drift car using space savers, vid is on the tube was at heathcote, this may not be allowable at a real track though, heathcote will let you run a rocket powered skateboard if you wanted

[Justa6]

Weld Pro Stars fit over stock BA Front Brakes in the following specs:

15 x 4.5"

5 x 114.3pcd

3.5" Backspacing

Ran them on my BA Ute & a mate's FG Ute with no modification to the brakes (other than putting the standard sh*tters on in place of the Brembo's).

thanks slash, but I can't seem to find any weld rim's with that bs

[Shyfrd]

I seen a 10 second drift car using space savers, vid is on the tube was at heathcote, this may not be allowable at a real track though, heathcote will let you run a rocket powered skateboard if you wanted

that I would pay to see lol

[IceMyButt]

I seen a 10 second drift car using space savers, vid is on the tube was at heathcote, this may not be allowable at a real track though, heathcote will let you run a rocket powered skateboard if you wanted

Not legal at most tracks

[STAINLESS again plz]

Weld Pro Stars fit over stock BA Front Brakes in the following specs:

15 x 4.5"

5 x 114.3pcd

3.5" Backspacing

Ran them on my BA Ute & a mate's FG Ute with no modification to the brakes (other than putting the standard sh*tters on in place of the Brembo's).

how about 15" rears? did your mate run em on his fg by any chance also? caliper grinding?

[Justa6]

I ended up cutting down chasers to 4" for the front. for the rear you need 6" b/s, which you can't get. so I widened them to 8", and changed the offset for the rear.