Daniel Member 299 Member For: 21y 9m 24d Gender: Male Posted 28/07/10 10:10 AM Share Posted 28/07/10 10:10 AM For the record, it is possible to have the Xforce twin 2.5" system fitted properly and it wont scrape unless you are ultra low or driving over pyramids.I have this system, with BIGGER mufflers and I have also had the car slightly lowered.Add this with the FPV front rear bumper being lower to the ground than the XR and you are talking worst case scenario unless you go reallllly low. Link to comment https://www.fordxr6turbo.com/forum/topic/69632-looking-at-changing-to-twin-25-exhaust/page/2/#findComment-1028321 Share on other sites More sharing options...
FAST-XR EVIL T Member 259 Member For: 16y 4m 21d Gender: Male Location: Liverpool NSW Posted 29/07/10 01:52 AM Share Posted 29/07/10 01:52 AM how far from the ground does you exhaust sit?my stock exhuast scrapes....but it sits only 80mm off the ground Link to comment https://www.fordxr6turbo.com/forum/topic/69632-looking-at-changing-to-twin-25-exhaust/page/2/#findComment-1028499 Share on other sites More sharing options...
power_slide Hitting the apex Donating Members 596 Member For: 16y 6m 12d Gender: Male Location: Miranda Posted 29/07/10 02:10 AM Author Share Posted 29/07/10 02:10 AM after I cut the flange it sits 77mm off the ground, I recon it would have been about 60mm with the flange Link to comment https://www.fordxr6turbo.com/forum/topic/69632-looking-at-changing-to-twin-25-exhaust/page/2/#findComment-1028501 Share on other sites More sharing options...
FAST-XR EVIL T Member 259 Member For: 16y 4m 21d Gender: Male Location: Liverpool NSW Posted 29/07/10 02:14 AM Share Posted 29/07/10 02:14 AM is the lowest point the cat?if it is, then changing to 2 x 2.5 isnt going to help... the dump may have to be modified.... Link to comment https://www.fordxr6turbo.com/forum/topic/69632-looking-at-changing-to-twin-25-exhaust/page/2/#findComment-1028502 Share on other sites More sharing options...
power_slide Hitting the apex Donating Members 596 Member For: 16y 6m 12d Gender: Male Location: Miranda Posted 29/07/10 03:15 AM Author Share Posted 29/07/10 03:15 AM no the cat front and rear flanges are 107mm off the road Link to comment https://www.fordxr6turbo.com/forum/topic/69632-looking-at-changing-to-twin-25-exhaust/page/2/#findComment-1028517 Share on other sites More sharing options...
FAST-XR EVIL T Member 259 Member For: 16y 4m 21d Gender: Male Location: Liverpool NSW Posted 29/07/10 03:48 AM Share Posted 29/07/10 03:48 AM maybe the hangers need to be modified, or extra ones added?? Link to comment https://www.fordxr6turbo.com/forum/topic/69632-looking-at-changing-to-twin-25-exhaust/page/2/#findComment-1028527 Share on other sites More sharing options...
power_slide Hitting the apex Donating Members 596 Member For: 16y 6m 12d Gender: Male Location: Miranda Posted 29/07/10 03:59 AM Author Share Posted 29/07/10 03:59 AM done both from 2 different muffler shops Link to comment https://www.fordxr6turbo.com/forum/topic/69632-looking-at-changing-to-twin-25-exhaust/page/2/#findComment-1028529 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now