Reliable 300Rwkw: What Would I Need?

[freeze_dk]

my mate was making 370 with a monza

[our06t]

stay away from monza if your building a nice car to keep , process west stg1 cooler is great for this level , valve springs you won't know till you get to the power level you want some are fine some aren't.

the good high flow cat will take some strain off your valve springs along with the f6 intake and good air filter , surge tank is always a good idea for that time the tanks getting low and you boot it process west also make these .

and yes injecters probably get away with bosch42lb but if you ever want more than 300 you'll be better off with seimens 60lb

Edited 11/05/10 05:16 AM by our06t

[RAP1D]

Custom tune

Cooler kit

CAI

Hi flow cat

Injectors

If it's reliability your after, then this is the smartest and safest way to make 300wkws.

[BensXR6T]

Stay away from the monza, my BA didn't respond well to it at all. On a budget, go for the HDi kit as it will support further when you start itching for more.

Monza @ 15psi made 280rwkw

HDi @ 12 PSI made 302rwkw

My mods are 42lb injectors, nizpro valve springs, KN filter, 8 PSI actuator, high flow cat, 4" dump and twin 2.5" redback exhaust. It's very streetable and reliable.