jacob_xr6turbo Legacy Donating Member 433 Member For: 19y 15d Location: Richmond, Melbourne Posted 22/06/09 12:59 PM Posted 22/06/09 12:59 PM Transmax Z would have been a better choice, or a custom oil such as Mainlube T56 Gear Oil.
JaSoN-XR6T Member 8 Member For: 17y 4m 26d Posted 25/06/09 08:48 AM Author Posted 25/06/09 08:48 AM Hi Christiaan,Agreed mate... I looked high and low and couldnt find it anywhere??? any hints on where to get it?I will throw in the Transmax Z next time....im a little worried about the Fluid change even though the Transmission took almost 4 litres I read at the start of this post that the transmission has to be filled from the sensor plug???? Anyone know where that is ? I filled it from the fill plug until it dripped out...... took almost on the dot of 4 litres.....jase
jacob_xr6turbo Legacy Donating Member 433 Member For: 19y 15d Location: Richmond, Melbourne Posted 25/06/09 08:50 AM Posted 25/06/09 08:50 AM With the auto trans fluid, you do need to put a little more fluid in than usual.. There's a reverse lockout switch on the box that you can use instead.Alot of people keep putting fluid in until it stops chattering or making noises.
JaSoN-XR6T Member 8 Member For: 17y 4m 26d Posted 25/06/09 09:13 AM Author Posted 25/06/09 09:13 AM there is certainly no chattering noises that's for sure and the gear changes are smooth...the only issue I have is the occasional clunk when going in reverse or sometimes out of first gear if the revs are low..... is this normal??if not I might need to get the diff checked!!!! sometimes is liked something in the boot has gone clunk....intresting
John_K Legacy Donating Member 438 Member For: 17y 9m 21d Gender: Male Location: Sydney Posted 25/06/09 09:16 AM Posted 25/06/09 09:16 AM Mate, possibly could be the bush on it's way out.I'm off work tomorrow and Monday by the way.
BLK6T Member 305 Member For: 21y 11m 11d Gender: Male Location: Sydney NSW Posted 16/07/09 07:03 AM Posted 16/07/09 07:03 AM Well got my mainlube T56 oil today and magnetic plug which is a strong little bugger and draws the metal particles in the box to stop them floating around in the oil. Great idea me thinks!Hope to get the oil in this weekend and compare from the factory oil.Cheers
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now