Xr6t Exhaust On Xr6 Na

[MAVTOR]

I had read around about fitting a XR6T exhaust from the cat back on a XR6 NA but cant find any thing about its fitment is it bolt straight on or are there some other mods any help would be good I have a BF Mkll XR6 SEDAN AUTO.

[mntxr]

you need to take it to a exhaust place so they can make up y piece to fit to your car because and xr6turbo exhaust is twin 2 and a quater inch pipes from cat back and na xr6 is 2 and a quater inch single pipe all the way though

[MAVTOR]

Thanks for that,I will work on it now I know.

[Bucks]

If you are really looking to beef up your exhaust system, Herrod Motorsport (Australian Company) specialize in performance upgrades and you can also get 6 cylinder options. There product is designed for the turbo model but would not hurt a N/A.

http://www.herrodmotorsport.com.au/HerrodP...76/Default.aspx

Even though this is reasonably pricy way to go, it would definitely produce the best outcome.

Good luck with whatever option you choose.

[NVT]

you need to take it to a exhaust place so they can make up y piece to fit to your car because and xr6turbo exhaust is twin 2 and a quater inch pipes from cat back and na xr6 is 2 and a quater inch single pipe all the way though

Spot on mate.

MAVTOR, any XR6T or typhoon system will do the trick. They sell on the forums for around $100 for full stock systems. Any Exhaust shop can fabricate the Y peice needed.

I also believe you will want the whole system - not just the cat back...

Good luck mate,

Dan

[Under-Pants]

Correct, the cat-back does SFA on it's own.

Get yourself a set of Pacemaker #PH4490 headers adapted to an XR6T/Typhoon exhaust with a decent aftermarket cat (or a high-flowed standard cat ) and you will have a very cost & power effective setup mate

[2003-BA-XR6]

I have XR6T exhaust fitted on my n/a. it sounds awesome and there is a little power gain too.

here is the pics

Y piece

rear muffler

Center Muffler

[MAVTOR]

Thanks all for the info I have just done my sons BA XR6 from the cat back and has come out rather good ,nice sound and a slight improve in the bottom end to mid range,have now just got a complete turbo system which I will put on my BF XR6 shortly will let you know how it goes should be able to cut the engine pipe and joint before the cat,

[gassa]

I had read around about fitting a XR6T exhaust from the cat back on a XR6 NA but cant find any thing about its fitment is it bolt straight on or are there some other mods any help would be good I have a BF Mkll XR6 SEDAN AUTO.

Mate

We have just finished installing turbo exhaust on a na engine we fitted geni extractors and modified the cat to fit, We fitted everything up and measured the gap tacked into position them welded it sounds a bit tinny but I dont drive the car

gassa