Jump to content

Recommended Posts

  • Member
  • Member For: 22y 2m 26d
  • Location: sydney
Posted

hi all

I have had a rattling sound coming from my front pads (pads in their shims) for a while now and ford have a tsb out on it but it does not fix it.

it is only on the front brakes and my question is what is the best rotors and pads just for the front. I do not want to spend too much I just want the rattling fixed which the performance brakes do.

any ideas or specials on at the moment.

thanx

  • Dark Knight Mafia Member No. - 666
  • Member
  • Member For: 23y 7m
  • Location: Toowoomba
Posted

Your best bet for rotors would be some replacement DBA ones, either slotted or drilled and slotted, It could still run you close to $800 though with some good pads too.

Dazza.

  • Member
  • Member For: 22y 2m 26d
  • Location: sydney
Posted

sh*t that is a little expensive. another question if I get the brake upgrade do I need another spare wheel.

  • Flower Power
  • Legacy Donating Member
  • Member For: 23y 11m 15d
  • Gender: Male
  • Location: Sydney
Posted

Isn't the actual caliper causing the rattle?

If so then a simple rotor/pad upgrade will not fix the problem.

If you go the PBR/Premium rotors, you will need to make sure you have at least 17" all round, plus the spare.

  • Member
  • Member For: 22y 2m 26d
  • Location: sydney
Posted

you are right I would have to replace the whole lot at the front. the pbr set up needs 17" spare, what about the dba set up.

  • Flower Power
  • Legacy Donating Member
  • Member For: 23y 11m 15d
  • Gender: Male
  • Location: Sydney
Posted

Ummm...DBA just make rotors, which wouldn't fix your problem.

  • Crusty aviator
  • Member
  • Member For: 22y 3m 6d
  • Gender: Male
  • Location: ACT
Posted

DBA slotted $130 each and pads $120 a pair is a lot less than $800. SHould be able to acquire everything for under $450.

Dingah

  • Member
  • Member For: 22y 2m 26d
  • Location: sydney
Posted

wouldnt I need the caliper or shims I think they are called or is the dba set up everything

and cro I meant would you need the 17" spare with the dba set up (rotors, pads etc)

  • Flower Power
  • Legacy Donating Member
  • Member For: 23y 11m 15d
  • Gender: Male
  • Location: Sydney
Posted

Just to clarify:

When just changing rotors or pads, you will not need to change your wheels, or get a 17" alloy spare.

When changing the caliper, rotors and pads you will need to get a 17" alloy spare.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...