What about the Hyperflow one by MRT? I saw a good review in a magazine not long ago.

Just did a search for hyperflow, and found their xr6t cooler.. Also a CAI on the page as well. I cant find a price but I no MRT are very expensive and would expect this cooler to be similar in price to the APS unit..

Hyperflow xr6t intercooler

$1150 to be exact........ http://www.mrtrally.com.au/shop/cart_detail.asp quite reasonable really.

$1255 to be exact!

$1155 + GST

Looks like the price has come down a bit.

Rob

What about the Hyperflow one by MRT? I saw a good review in a magazine not long ago.

<{POST_SNAPBACK}>

Just did a search for hyperflow, and found their xr6t cooler.. Also a CAI on the page as well. I cant find a price but I no MRT are very expensive and would expect this cooler to be similar in price to the APS unit..

Hyperflow xr6t intercooler

<{POST_SNAPBACK}>

$1150 to be exact........ http://www.mrtrally.com.au/shop/cart_detail.asp quite reasonable really.

<{POST_SNAPBACK}>

I think its a good design too looking at it, as opposed to the current intercooler options, the end tanks are placed top and bottom instead of at the sides, so the end tanks remain behind the front bumper obstructions and more of the core is exposed to the airflow.. I might check this cooler out

$1255 to be exact!

$1155 + GST

Looks like the price has come down a bit.

Rob

<{POST_SNAPBACK}>

Hi,

I am in the process of having the Hyperflow intercooler fitted (will be ready tomorrow - Thursday).

No cutting, grinding, welding etc. required. I'm in Perth and I found the techs from Hyperflow (Sydney) to have been very helpful (even called to ensure that the kit arrived).

I also purchased the Stage II pipework (it's on the Hyperflow website).

The only issue was where to locate the auto-trans cooler as there is no longer enough space between the Hyperflow intercooler and the A/C condenser. Got it sorted though...

The core is bar-n-plate and was a few $$$ more, however I didn't want the car cut-n-grinded etc.

I'll post pics tomorrow.

Regards,

Tom.

Hi,

I am in the process of having the Hyperflow intercooler fitted (will be ready tomorrow - Thursday).

No cutting, grinding, welding etc. required.  I'm in Perth and I found the techs from Hyperflow (Sydney) to have been very helpful (even called to ensure that the kit arrived).

I also purchased the Stage II pipework (it's on the Hyperflow website).

The only issue was where to locate the auto-trans cooler as there is no longer enough space between the Hyperflow intercooler and the A/C condenser.  Got it sorted though...

The core is bar-n-plate and was a few $$$ more, however I didn't want the car cut-n-grinded etc.

I'll post pics tomorrow.

Regards,

Tom.

<{POST_SNAPBACK}>

So are you installing it yourself??

Look forward to seing your results.

This is one of xtc in victorias coolers direct fit no mods required great value for money!!

This is one of xtc in victorias coolers direct fit no mods required great value for money!!

I agree... easy fit and works a treat

So are you installing it yourself??

Look forward to seing your results.

<{POST_SNAPBACK}>

Hi Swanga,

Nope I'm not installing it... a tuner here in Perth is doing the work (I would most probably bugger it up!!! )

Cheers,

Tom.

So are you installing it yourself??

Look forward to seing your results.

<{POST_SNAPBACK}>

Hi Swanga,

Nope I'm not installing it... a tuner here in Perth is doing the work (I would most probably bugger it up!!! )

Cheers,

Tom.

<{POST_SNAPBACK}>

Where in Perth are you getting it installed and how much did it cost if you dont mind me asking?

anyone know how much the MRT/Hyperflow jobbie is with the full stage 3 pipework etc? that looks pretty tricky

Mattson,

I have the full MRT kit that Hyperflow have designed - I was fortunate enough to have one of the development cars. I am not sure on the pricing yet, as my car is still getting more work done so I havent paid yet! Mine is on the dyno today for tuning and will probably go to the Holden/Ford show to be on display for MRT on the weekend. Fingers crossed for a big result! They have had some promising results with a few cars less modded than mine, so we will see.

I know the I/C kit on its own was worth around $1400 fitted I think. The new pipework looks very trick when your up close and personal!

Edited September 2, 200521 yr by Link