Damo21

Innovative turbo systems

I'll have to put one up later. Only on my phone now so won't let me upload. The waste gate comes just before the turbo. It's welded onto the manifold right at the flange

I had already changed spring and it didn't make a difference but I didn't try but solenoid back on. I'll try that thanks mate

Aww yeah. Where does bleed off valve bleed to? Atmosphere? A dude named Dave. Does some drag cars. He uses ems computers.

I have tried different Tensioned springs and still no difference :(

What if I run another external waste gate?

What could be causing the problem to begin with? Can't I fix it by keeping everythin the same?

ITs externally waste gated. Because we has trouble with ported exhaust housing we ran external gate and still having problems.

Hey everyone I'm having a problem with my boost. I wanna run 16 psi but the boost is hitting 20 psi. I have rapid systems v3 intercooler kit, gt35 with .70 ar comp, 4 inch intake, 4 inch dump pipe to 3.5 inch single system, 40mm external waste gate, 60lb injectors, 044 and surge tank, sx fuel reg and rail and valve springs. No matter what we do we can't get boostdown under 20 psi. Just wondering if anyone had any ideas? Any help would be appreciated thanks

Nope no idea haha how will I cut it off?

I spoke to guys at dellows conversions and I'll get bell housing off them thanks for the help

Also what would be best stall for car? I was thinking around 3000? Is that too high? I'm nt entirely sure about the way stall convertors work

Yeah I seen that catalogue before and couldn't find one. I might just get one made coz I have gearbox I just need adapter plate so I can continue with making cross member and getting tailshaft lengths and so on. Any other places that you guys know?

Oh ok that is obviously what they meant haha. How much is something like that? How would they cut bell housing off?

I called them and they said they didn't do one or they made a c10 bellhousing that bolts to th 400 pump or some crap. Not too sure what he meant. The bloke who built my btr stronger said he can make me one with milling machine for about $300. Does that sound dodgy?