XR6TBAMK2

Gday all, Im looking at buying rims of a friends friend and he has given me the dimensions. They are 19 x 8.5 255/30/19 Offsets +36, 5 x 114.3. Any advice would be much appreciated, Thanks guys.

I had mine removed and two straight through pipes fitted.I had it on for a week then took it off because it sounded terrible on idle.

Its got the standard converter,valve body been played with,line pressure is right up and all the gearbox settings from the capa box have been removed from the tune.The main problem is when its sometimes getting stuck in between gears...anyone had that problem before????

A top sydney tuner has done all the work on the car,I was going to wait to run the box in before getting a retune.I had the gearbox settings that were on the capa box taken back to standard,including the torque tags as it was causing dramas for the auto builder.The builder couldnt raise the line pressure on the box unless the all the settings were removed.The box feels stronger and shifts alot harder but it still has that problem....just cant figure it out.

Gday all, Ive had a problem with my 4 speed auto for a while now so I ended up getting it strenghtened.Usual mods done to box, heavy duty clutch packs,bands and line pressure etc.The main problem, apart from the usual slipping clutches was that it was seeming to be getting stuck in between gears,mainly 4th but sometimes 3rd and would start shuddering. To fix the problem, I would either have to back off the throttle and the box would eventually fall back into place or put my foot down and 'sometimes' it would drop back into the lower gear.This would happen without driving the car hard also.I thought after having the box rebuilt that it would go away but it hasnt.The gearbox builder seems to think that it must be something electronic somewhere.Has anyone had this problem happen to them? The car is putting out 330rwkws street and 352rwkws on race. Any help would be much appreciated.Thanx

Mine started to play up around the 300rwkw mark.Get a trans cooler fitted and it will increase its life a 'little' bit longer.

Northmead Auto do rebuilds too.

I rang Protrans today and the guy said that he didnt strengthen the 4 speed autos anymore. I also rang Northmead Auto and he said he's done heaps of them and knew what he was talking about .Also,was more in my price range as well. I might give him a go in the new year.

Has anyone had their box rebuilt by Northmead autos? I was recommended to use them and was wondering if anyone knows what their boxes are like once built?

Im looking for a auto builder in sydney too,I heard Northmead auto do them as well.Has anyone had their box built by them?

I bought my T late in 2005 brand new,BA MK2 just clocked 35k.All doing well except for the auto.