Jump to content

Matty quest to keep a Turbo Territory stock


MattyP

Recommended Posts

  • MattyP
  • Cruise Control
  • Member For: 11y 11m 15d
  • Gender: Male
  • Location: Central Coast

So after almost a 3 year hiatus I'm back with some turbo barra fun. So join me on resisting the urge to not go silly with it.

A very stock 08 Turbo Territory Ghia,

Picked it with 250000kms and first thing to do is give it a full once over.

 

Had it on the weighbridge and came in at 2.26T but surprisingly spritely.

Fresh thermostat in as the bypass had failed and coolant wouldn't go above 80.

Flush oil is in and next is a proper service, Zf Service, Transfer case and both Diff Oils. Also probably in need of a good detail.

Only issues I've noted as the front end seems to clunk over bumps so I'm assuming I'm due for some fresh upper and lower control arms. Rear bump stops are looking quiet ratty and new ones on the way.


But the absolute most annoying thing was on the drive home after buying it, The bonnet scoop liner blew off on the highway and supposedly ford don't supply them anymore. No wreckers seem to have them so that's great.

The most I plan on is some injectors and a fuel pump and E85 as there is a servo right near me.

 

I always thought the G6 was a barge but this things on another level.

Anyway enjoy some pics

Terry.thumb.jpg.a9ef7549a5e799352d9bff61740fd838.jpg1086071360_TerrryBack.thumb.jpg.256075741cc94a1a16619a8715415ed6.jpg

Edited by MattyP
  • Like 4
Link to comment
Share on other sites

  • MattyP
  • Cruise Control
  • Member For: 11y 11m 15d
  • Gender: Male
  • Location: Central Coast

Unfortunately it was on the highway doing 110 and saw someone run over it, Wasn't sure what it was until I got home 45" later. Bloody killed me when I realised

Link to comment
Share on other sites

  • MattyP
  • Cruise Control
  • Member For: 11y 11m 15d
  • Gender: Male
  • Location: Central Coast

Do the turbo terrys have the same issue with Ball joints as the non turbo series 1s?

and are the control Arms the same as the NA ones?

Link to comment
Share on other sites

  • Donating Members
  • Member For: 20y 7m 16d
  • Gender: Male
  • Location: Townsville
On 27/11/2022 at 3:50 PM, MattyP said:

Do the turbo terrys have the same issue with Ball joints as the non turbo series 1s?

and are the control Arms the same as the NA ones?

 

Yes, up until the AWD series 2 SY and from then the geometry was finally changed to the ball joint facing up. The link has everything that is required to change over, pretty sure the abs sensors require shaving down to fit or some mod also 

https://territorycrazy.myshopify.com/products/ford-territory-awd-syii-conversion

  • Like 1
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
  • Create New...
'