Jump to content

336RwKw G6'er @ 11psi


SydCrazi

Recommended Posts

  • Member
  • Member For: 13y 4m 12d
  • Gender: Male
  • Location: NSW

336rkw 🤟 at 11psi. Used weird products to get there, not the standard route 😎🤟

 

Venom Dump and High Flow Cat

Turbosmart Dual Port BOV

Process West CAI

Bosch 1000cc Injectors

Intune Motorsport Intercooler Piping

Intune Motorsport Turbo Muffler Delete

Intune Motorsport Braided Turbo Oil Line Kit

Autotecnica Intercooler

SCT4 Tuner

Mamba  GTX3584R Dual Ceramic Turbo

Mamba 12Psi actuator

 

Non Performance Upgrades;

Nolathane rear centre and side bushes.

Nolathane front swaybar bushes

Gas shocks

Drilled and Slotted front rotors

Stainless Turbo/Exhaust Gaskets

OBD2 LCD gauge cluster

 

Absolutely love my unassuming looking comfortable side stepper 😁💪😎

 

To be installed;

M86 TruTrac

Crow or Atomic Valve Springs

Upgraded Fuel pump

Battery Relocation Kit

Turbosmart 14psi Actuator

Retune.

May need bigger intercooler

May need cat back

20211125_161019.jpg

Edited by SydCrazi
Link to comment
Share on other sites

  • Puff
  • Gold Donating Members
  • Member For: 9y 1m 28d
  • Gender: Male
  • Location: South Australia

Get those valve springs in before you try for more boost. You're right though it's never enough...until you get to the point where it's too much lol

Link to comment
Share on other sites

  • Member
  • Member For: 13y 4m 12d
  • Gender: Male
  • Location: NSW

Yeah @Puffwagon top tip on the springs.. Along with Walbro intank pump, first port of call.. 🚢  Whilst we're here and talking springs, any preferences or not that important?

 

I need to stop, but I can't, I quit smoking, but can't quit more HP.. 😅  Hmmm.. oh well, here's to the next stage 🍻

Edited by SydCrazi
Link to comment
Share on other sites

  • Puff
  • Gold Donating Members
  • Member For: 9y 1m 28d
  • Gender: Male
  • Location: South Australia

The thing to consider with springs is how much rpm and how much boost are you gonna run.

 

I've used the crow kit with retainers up to 40psi which is probably too much spring for a 20psi tune...but not the worst.

 

Have a look around and see what they're rated for, ie how much seat pressure they have, then decide upon that.

 

You could consider our engines undersprung once they're tuned, the springs aren't stiff enough to close the valves in time. Conversely you don't want to run a super heavy spring if you don't need to cos it'll wear the valve train prematurely.

 

So yeah have a look, find some options then post again and get some feedback from others experience.

Link to comment
Share on other sites

  • Member
  • Member For: 13y 4m 12d
  • Gender: Male
  • Location: NSW

Thanks. Another good tip. Already chosen based on that.

 

https://www.ebay.com.au/itm/BA-BF-FG-Falcon-Barra-XR6-Turbo-Valve-Springs-Crow-Cams-1808-24-/265135631681?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l49286&mkrid=705-154756-20017-0

just a intank pump, battery relocation, actuator and tune... Sweeeeet...

Link to comment
Share on other sites

  • [IMPULSIV3]
  • Donating Members
  • Member For: 4y 11m 28d
  • Gender: Male
  • Location: Perth, WA
15 hours ago, Puffwagon said:

I've used the crow kit with retainers

Can anyone explain when it would be necessary to use aftermarket retainers when doing springs?
Whats wrong with the standard retainers?

 

I know rob uses the crow springs, and the spring and retainer kit is on sale atm from precision racing

 

Edit, same kit also on sale from independent motorsports

Edited by biddie_fiddler
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
  • Create New...
'