Nelson Nieuw New Member 2 Member For: 3y 2m 16d Posted 02/02/21 05:28 AM Share Posted 02/02/21 05:28 AM Hey guys, So I'm currently trying to remove the four connectors underneath my ICC so that I can install some pod gauges just above the ICC. Unfortunately, I've been struggling with removing the first connector (right hand side), I've pressed the small clip in and pulled bloody hard and still the connector won't budge. Has anyone else had this issue and might be able to shed some light, or am I doing it completely wrong :( Link to comment Share on other sites More sharing options...
joncitizen Member 91 Member For: 12y 7m 15d Posted 02/02/21 05:36 AM Share Posted 02/02/21 05:36 AM Just wiggle it while holding the clip in. If that fails use a mirror to see where you're going wrong and get someone stronger. 1 Link to comment Share on other sites More sharing options...
k31th less WHY; more WOT Site Developer 28,287 Member For: 16y 8d Gender: Male Location: Melbourne Posted 02/02/21 05:55 AM Share Posted 02/02/21 05:55 AM they come out quite easily once you've pressed in the tab that's locking it in place... a pick is a good way to push on the tabs (with assistance of a mirror if necessary) and just pull down on the plastic bit surrounding the tab once it's pushed. From memory one of them you push "outwards" rather than "inwards" 1 Link to comment Share on other sites More sharing options...
Nelson Nieuw New Member 2 Member For: 3y 2m 16d Posted 02/02/21 09:28 AM Author Share Posted 02/02/21 09:28 AM Oh that would make a lot more sense, I'll try that in a moment. I had been previously pushing the locking tab inwards with a pick and no matter how hard I pulled, it wouldn't budge. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now