Jump to content

Replacing the TCM / Mechatronic unit in a ZF6HP26


BigKriss

Recommended Posts

  • Member
  • Member For: 12y 4m 20d
  • Gender: Male
  • Location: Sydney, Australia

Car is a ford falcon FG G6E 2008. Car has 65,000kms. Car was giving me 5-10% harsh shifts.

 

I f0cked up my TCM / Mechatronic unit.  I was first changing the fluid and then some seals on the Mechatronic unit.

 

I dropped it on the ground with my car on jack stands.

 

I put it back and filled it with fluid.

The car would not go into gear.

I read the PCM, the error code was P0973 Shift Solenoid ‘A’ control Circuit Low

I am thinking it is the broken one in the picture.

What I understand is that I can get another Mechatronic unit from another FG and reprogram it with PCMTEC that I have access to. Solenoid kit ZF# 1068298044

Or I can just replace faulty solenoid or should I change all six?

There are a lot of options to purchase these but I don’t know where from.

https://www.ebay.de/itm/Original-ZF-1068298044-Druckregler-Solenoid-Kit-6HP19-6HP26-6HP32-Magnetventil-/113926804871

https://www.aliexpress.com/item/33008808218.html?spm=a2g0o.productlist.0.0.71b65ae2IjYJqY&algo_pvid=67b904ed-f641-4004-aa92-61a69858c940&algo_expid=67b904ed-f641-4004-aa92-61a69858c940-16&btsid=0ab50a5715932544922773799e89ea&ws_ab_test=searchweb0_0,searchweb201602_,searchweb201603_

 

What is my best course of action here? My way of thinking is get another solenoid kit, reset the transmission adaptions in PCMTEC somewhere and hope for the best.
 

>> this is it dropped

Edited by BigKriss
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
  • Create New...
'