Jump to content

Which one is going to be the better choice?


ken666

Recommended Posts

  • Donating Members
  • Member For: 5y 2m 27d

Hey guys, I'm in the process of choosing a street use turbo for my new engine that's getting close to the final stages of assembly.

I have already chosen a turbo for dyno and off street use, a Garrett GTX 4709R, but I understand that it's not going to be my best choice for daily use.

I keep going back to the likes of 2 similar sized turbo's a Garrett GTW 3884r with a 67mm inducer, and a Aeroflow boosted 6762 for street use.

 

Both are internally gated with a 42mm flapper and ceramic ball bearings.

I plan on just swapping the tune, manifold and dump pipe when changing to the bigger/smaller Huffer as the 4709 is fitted to a 6boost and is externally gated.

 

Has anyone had much to do with either 3884 and the 6762?

I still plan on running 30psi+ with the smaller setup and don't want to prematurely wear it out!

Any advice will be taken on board when making the decision.

Cheers Ken

Link to comment
Share on other sites

  • 1 month later...
  • New Member
  • Member For: 3y 11m 15d

I would also like to know seems the aeroflow is a reputable manufacturer at a good price. I believe it's equivalent to gtx3584rs but half the price. Gtw3884 you can get for a little more money in super core and know you will have a killer set up. Im also stuck in 2 minds but the gtw has proven itself.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
  • Create New...
'