Jump to content

Puffwagon's Territory Adventures


Puffwagon

Recommended Posts

  • Puff
  • Gold Donating Members
  • Member For: 9y 2m 22d
  • Gender: Male
  • Location: South Australia

They're Breeze clamps so hardly junk.

 

Perforated clamps are fine. It's knuckle heads overtightening the clamps that wrecks the hose.

  • Like 1
Link to comment
Share on other sites

  • Donating Members
  • Member For: 5y 11m 11d

dont know how ive missed this thread, but subscribed for more updates #territorylife.

 

I will add to the point about the LSD rear, when I got mine I could launch it lamely on dirt or in wet and have 1f 1f wheel spin.

After putting a LSD in the rear it became way way more difficult to do that again and I gained a heap of confidence in the extra traction.

but I only run mine around on about 12 psi daily and when I was chasing a 12 at the drags I had to get it to peak 15psi.

 

Mine has the 45t/s wastegate welded in to the fg turbo mani, stock turbo housing has a 4inch FG dump pipe.. then from there its 5inch cat, out of the cat its just 3.5inch straight pipe with a 3.5inch hot dog to the standard 3inch rear section.

I only did this because it was easy as  pie and im not at a power level that would surpass the 3inch pipe at the rear.

Edited by BeerTurbo
swear to much
  • Like 1
  • Thanks 1
Link to comment
Share on other sites

  • Puff
  • Gold Donating Members
  • Member For: 9y 2m 22d
  • Gender: Male
  • Location: South Australia

Mine tends to spin both front tyres and not the back, although I did have one occasion where the back let go too.

 

26 minutes ago, BeerTurbo said:

4inch FG dump pipe.. then from there its 5inch cat, out of the cat its just 3.5inch straight pipe with a 3.5inch hot dog to the standard 3inch rear section.

I might go this route too as I have the stuff sitting here to do it and it'll be easy to fit it all.

 

Just gotta get motivated to do it.

Link to comment
Share on other sites

  • Donating Members
  • Member For: 5y 11m 11d
10 minutes ago, Puffwagon said:

Mine tends to spin both front tyres and not the back, although I did have one occasion where the back let go too.

interesting. ive never had that.

maybe im not trying hard enough.

 

I put rear airbags in mine, cause its technically my all rounder baby transporter / car trailer hauler these days.

might help with your squatting and towing condrum maybe? 

 

 

76910261_10162589514855424_1188029452047613952_o.jpg

Edited by BeerTurbo
media
  • Like 1
Link to comment
Share on other sites

  • Puff
  • Gold Donating Members
  • Member For: 9y 2m 22d
  • Gender: Male
  • Location: South Australia

I've got airbags but one has a leak so that'll need repairing.

 

I've got a set of new springs here that I haven't fitted yet. I'll fit the rear tomorrow and see if I can sort out the leak while I'm at it.

Link to comment
Share on other sites

  • Dropping a turd
  • Gold Donating Members
  • Member For: 16y 5m 24d
  • Gender: Male
  • Location: Perth

https://www.normagroup.com/norma/en/products/norma-hd/?open&ccm=020030

6 hours ago, BeerTurbo said:

interesting. ive never had that.

maybe im not trying hard enough.

 

I put rear airbags in mine, cause its technically my all rounder baby transporter / car trailer hauler these days.

might help with your squatting and towing condrum maybe?

76910261_10162589514855424_1188029452047613952_o.jpg

 

Territory great tow car. 

j7oeOr8.jpg

 

35otDhe.jpg

  • Like 2
Link to comment
Share on other sites

  • Puff
  • Gold Donating Members
  • Member For: 9y 2m 22d
  • Gender: Male
  • Location: South Australia

Rear springs are in and I cbf frigging around with the airbags so left them out. It seems to squat less but it still smokes the front tyres so meh.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
  • Create New...
'