Jump to content

GTX 3582r gen2


blacktur8oute

Recommended Posts

  • Member
  • Member For: 10y 3m 27d
  • Gender: Male

Hi all

ive just purchased a gen2 supercore for my FG whats the best way to go about the rear housing

do I just use the original with the flapper mod

 

should I external gate it and mount it to the original manifold 

 

or do I put it on a 6 boost 

 

also what size housing works best with these, want to do it once properly 

 

cheers

Link to comment
Share on other sites

  • less WHY; more WOT
  • Site Developer
  • Member For: 15y 11m 18d
  • Gender: Male
  • Location: Melbourne

depends on your boost level and power goals, realistically... that being said; the stock housing with a decent port and flapper mod will do the job for most applications

Link to comment
Share on other sites

  • ...JD TUNING ADELAIDE...
  • Gold Donating Members
  • Member For: 15y 9m 26d
  • Gender: Male
  • Location: Adelaide

Factory 1.06 rear housing is the right size but your port job needs to be bang on perfect otherwise you’ll be up high in the boost range even with a tune. 
Actuator preload is critical to get right too 

 

if in doubt get the tune shop to fit it and port & flapper it

 

if you’re dead set on doing it yourself I sell monster port new housings and actuators and will walk you through the set up process :) 

  • Like 2
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
  • Create New...
'