Jump to content

Help with temperamental starting BAXR6T


Hornblower

Recommended Posts

  • Bronze Donating Members
  • Member For: 10y 2d

Put a volt meter on the battery as some one else try's to start it, should be around 10v if it's under this replace battery, if it stays around 12-13v change starter. because you get a  'clack' from the starter the ignition switch, inhibitor, ecu & relay are working. You earthed the jump pack to the block so I assume that the earth is OK . Starters are cheap but they're not easy to change. I recon the FG ones turn the engine over faster & will fit after you cut the extra tag off 

Link to comment
Share on other sites

  • Member
  • Member For: 21y 1m 27d
  • Location: Spit Junction NSW

Thanks for the tip 4321, I'll give it a go when I'm next back to the car. I'm back at the farm now packing my bags for 10 days in the Hawaiian Islands, so will get back into the detective work when I return in a few weeks...

Link to comment
Share on other sites

  • Dropping a turd
  • Gold Donating Members
  • Member For: 16y 5m 1d
  • Gender: Male
  • Location: Perth

I havnt read the whole thread but have you cleaned the battery terminals. ??

 

Also check the cable connection at the starter motor

Edited by arronm
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
  • Create New...
'