BLULMN New Member 2 Member For: 5y 9m 17d Posted 28/06/19 04:33 PM Share Posted 28/06/19 04:33 PM (edited) So boys have a ba manual Ute welded my diff a couple of weeks ago for some extra fun and I keep snapping the bolt that holds the leafs together, has anyone had this problem and found a real solution?? I’ve tried putting high tensile m8 bolts in but because the head of the bolts are so short the diff doesn’t have a comfy place to sit so the diff just slides back and forth. I’ve also tried putting a couple of nuts either sids of the leaf to stack it up a bit but I just bent and snapped them in seconds. Thanks Edited 28/06/19 04:34 PM by BLULMN Link to comment Share on other sites More sharing options...
OZYWALKER XR50T Gold Donating Members 2,795 Member For: 10y 11m 22d Gender: Male Location: Western Sydney Posted 29/06/19 12:05 AM Share Posted 29/06/19 12:05 AM Male sure the u bolts are properly tight. They should be taking the load not the locating bolt.Sounds like it's twisting the axle left/right when you cornering.Also check the bushes are decent, if not get some metal plates to take up the slack where the bushes were. Link to comment Share on other sites More sharing options...
arronm Dropping a turd Gold Donating Members 9,520 Member For: 16y 5m 27d Gender: Male Location: Perth Posted 29/06/19 01:28 AM Share Posted 29/06/19 01:28 AM Get some new bolts with the correct size from a spring manufacturers like kings or pedders. Maybe post an image of your issue Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now