xr6tjt New Member 7 Member For: 5y 10d Gender: Male Location: Melbourne Posted 10/05/19 11:58 AM Share Posted 10/05/19 11:58 AM Hi everyone, fairly new to the ford scene and have myself a tidy xr6 6 speed manual turbo m2 ba, have had it for a few months and recently I have been sus on the rear diff bushes, the car has some backlash and tonight I took it out on some back country roads for the first time in the wet (standard power figures) and it was disappointing, can’t lay any power to the ground as the axle tramp is bad, I’ve played around under it once and tried to inspect the diff bushes myself but can’t see past the massive round washer type shield, I’ve had a mechanic perform a rwc inspection and he said that they are ok, they where also changed recently before I purchased the car, aparently! I am just mostly Suss on them as it has backlash and axle tramp, it’s quite annoying and very unrefined, any suggestions are welcomed, thanks Link to comment Share on other sites More sharing options...
k31th less WHY; more WOT Site Developer 28,292 Member For: 16y 10d Gender: Male Location: Melbourne Posted 10/05/19 12:28 PM Share Posted 10/05/19 12:28 PM It probably has aftermarket bushes in it that transfer more NVH. You can see the back of the diff bush if you're underneath the car and it's near the spare wheel well. Link to comment Share on other sites More sharing options...
BeerTurbo Donating Members 234 Member For: 5y 11m 11d Posted 11/05/19 01:02 AM Share Posted 11/05/19 01:02 AM Most people with the two piece poly bushings as they are super simple to fit, but your going to have a basically solid mount and way more road noise. you best bet is to sus out what you have, then change it to something different. stock are usually black and old, superpro are blue or the solid polys are usually red. Link to comment Share on other sites More sharing options...
xr6tjt New Member 7 Member For: 5y 10d Gender: Male Location: Melbourne Posted 11/05/19 08:50 AM Author Share Posted 11/05/19 08:50 AM Thanks for the replies, I’ve inspected them today on a mates hoist, they look ok but so show slight signs of wear, I don’t know what’s acceptable and what isn’t, they look to be either standard ford or aftermarket, I did take some pics but I’m having a hard time putting them up! Link to comment Share on other sites More sharing options...
k31th less WHY; more WOT Site Developer 28,292 Member For: 16y 10d Gender: Male Location: Melbourne Posted 11/05/19 09:56 AM Share Posted 11/05/19 09:56 AM pic instructions here -> https://www.fordxr6turbo.com/forum/topic/92470-how-to-put-images-in-your-post/ Link to comment Share on other sites More sharing options...
xr6tjt New Member 7 Member For: 5y 10d Gender: Male Location: Melbourne Posted 11/05/19 10:47 AM Author Share Posted 11/05/19 10:47 AM (edited) thanks again keith, I cant get the upload thing to work so perhaps I can just put up the links and hopefully they work, im not the most computer savvy, this one looks odd how its so offset?? Edited 11/05/19 10:59 AM by k31th fixed pics Link to comment Share on other sites More sharing options...
xr6tjt New Member 7 Member For: 5y 10d Gender: Male Location: Melbourne Posted 02/07/19 11:12 AM Author Share Posted 02/07/19 11:12 AM Changed out a full set of shocks and slightly lowered springs! No more diff hop 👍👌 Link to comment Share on other sites More sharing options...
k31th less WHY; more WOT Site Developer 28,292 Member For: 16y 10d Gender: Male Location: Melbourne Posted 02/07/19 11:15 AM Share Posted 02/07/19 11:15 AM nice work on fixing the problem and coming back to tell us Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now