ken666 Donating Members 140 Member For: 5y 3m 23d Posted 27/04/19 11:41 AM Share Posted 27/04/19 11:41 AM Hey guys I'm just in the last stages of fitting the new GTX3584R that I built for my car, but was a bit curious about whether there should be a copper seal on both sides of the water cooling lines into the turbo? Cos there was only one on the cartridge side of each line in? But the seal/gasket kit provides enough to fit one on each side of the bolt/line in? Seems logic to fit on both sides as there is no other true form of sealing? Cheers Ken Link to comment Share on other sites More sharing options...
Puffwagon Puff Gold Donating Members 15,127 Member For: 9y 2m 26d Gender: Male Location: South Australia Posted 27/04/19 11:43 AM Share Posted 27/04/19 11:43 AM You want 4 washers for the coolant. 1 Link to comment Share on other sites More sharing options...
ken666 Donating Members 140 Member For: 5y 3m 23d Posted 27/04/19 11:50 AM Author Share Posted 27/04/19 11:50 AM thought so, Cheers Puffwagon Link to comment Share on other sites More sharing options...
k31th less WHY; more WOT Site Developer 28,303 Member For: 16y 14d Gender: Male Location: Melbourne Posted 27/04/19 12:32 PM Share Posted 27/04/19 12:32 PM yep, puff is correct. one on each side of the banjo portion of the coolant line, e.g. one turbo-chra side and one on the bolt-head side. get a new set of washers/gaskets from J@, plus some nordloc washers and do it all properly once 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now