Jump to content

FG XR6 TURBO 400rwkw HELP


Mushable

Recommended Posts

  • New Member
  • Member For: 5y 4m 11d
  • Gender: Male
  • Location: Darwin

2011 FG XR6 TURBO - 110xxxkms 

The question is can I get 400rwkw out of these mods.

- High-Flowed gt3576 with the billet 11 blade core. and ported front and rear housing with Flapper mod. & 12psi actuator 

- Process west stage 2 intercooler and piping

- Turbo side intake 

- Bosh 1000cc Injectors and walbro 460 intake pump. 

- X-Force 4inch Dump and Cat & Middle Muffler delete

- Atomic Valve Springs & Retainers. 

 

The motor has been in awesome condition never missed a service. very (Healthy motor) 

Question is can I get 400rwkw living in Darwin with approximate these temps in the tuning shed.

40°C 80% humidity 

 

Any other mod I can add to rectify I can get 400rwkw?

Link to comment
Share on other sites

  • Dropping a turd
  • Gold Donating Members
  • Member For: 16y 5m 2d
  • Gender: Male
  • Location: Perth
On 05/03/2019 at 12:59 AM, Mushable said:

2011 FG XR6 TURBO - 110xxxkms 

The question is can I get 400rwkw out of these mods.

- High-Flowed gt3576 with the billet 11 blade core. and ported front and rear housing with Flapper mod. & 12psi actuator 

- Process west stage 2 intercooler and piping

- Turbo side intake 

- Bosh 1000cc Injectors and walbro 460 intake pump. 

- X-Force 4inch Dump and Cat & Middle Muffler delete

- Atomic Valve Springs & Retainers. 

 

The motor has been in awesome condition never missed a service. very (Healthy motor) 

Question is can I get 400rwkw living in Darwin with approximate these temps in the tuning shed.

40°C 80% humidity 

 

Any other mod I can add to rectify I can get 400rwkw?

 

May go 300 on a cool day..

Link to comment
Share on other sites

  • FREAKY
  • Donating Members
  • Member For: 14y 3m 4d
  • Gender: Male
  • Location: Melbourne

gtx3576 faster spool good for street car, I wish I went that way back in the day. 

 

a gtx 3582 will go to 500 but, you can take a better advantage of it on a built motor to ramp up the boost. heheh

Link to comment
Share on other sites

  • ...JD TUNING ADELAIDE...
  • Gold Donating Members
  • Member For: 15y 9m 27d
  • Gender: Male
  • Location: Adelaide

Derp

 

 a “Modded” 76 has enough to go 400 on 98 but not with a stock front cover, you’ll need the 0.6 GTX cover and then you may as well just go a full turbocharger replacement imho 

 

but 

 

I've personally tuned a GT3576 with the wheel upgrade and porting to 366rwkw on 98 and definitely had more in it at that point, how much more on the stock 0.5 cover I would say about 10-15rwkw more maxxx, seen the 0.6 front cover (so basically a full GTX 3576 ) do 405rwkw on 98 and 441rwkw on E85 

 

the reason you won’t be up close to the 400 mark will purely be because of the N.T’s weather 40* and 80% does nothing for nobody including turbocharged vehicles lol 

 

Technically the hardware choice is close at 380 ish rwkw on a strong boost tune but not at those conditions

  • Like 1
Link to comment
Share on other sites

  • 6 months later...
  • Donating Members
  • Member For: 19y 8m 7d
  • Gender: Male
  • Location: Hills District, NSW

320rwkw stock gt3576, 390rwkw gtx3576, 450rwkw pte6235, 450rwkw efr9174 (quickest spool) on pump98.

 

Water/meth injection for consistent power regardless of ambient temp.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
  • Create New...
'