Jump to content

FG F6 450rwkw


F6 fitzi

Recommended Posts

  • ...JD TUNING ADELAIDE...
  • Gold Donating Members
  • Member For: 15y 9m 27d
  • Gender: Male
  • Location: Adelaide

Apples not be apples here boys 

 

need to read all of the information on all of the pages 

 

have a look at his turbo and what’s been done to it on a 0.5 housing 

 

efficiency ———> window 

Link to comment
Share on other sites

  • Bronze Donating Members
  • Member For: 7y 7m 14d

66mm would make more power and certainly a lot more on 28psi. something isnt working as it should, either blockage or flow issues or the turbo isnt what was advised and isnt working effectively or efficiently

Link to comment
Share on other sites

  • Puff
  • Gold Donating Members
  • Member For: 9y 2m
  • Gender: Male
  • Location: South Australia

This is in the first post.

 

On 21/02/2019 at 8:39 PM, F6 fitzi said:

Race equipped stage 3 turbo, 68mm billet core. 

 

Heck knows why the dyno sheet looks like that. There is a spelling mistake in there for the correction factor so maybe another keystroke was incorrect and it changed something else???

 

 @F6 fitzi call dmp and ask them.

  • Like 1
Link to comment
Share on other sites

  • ...JD TUNING ADELAIDE...
  • Gold Donating Members
  • Member For: 15y 9m 27d
  • Gender: Male
  • Location: Adelaide
3 hours ago, arronm said:

Where does it say 0.5 housing

 

All the gold bars have blinded you over the years 🤩

 

a 68mm wheel in a 0.5 cover doesn’t reak of a good combo imho and clearly the boost pressure isn’t delivering Ltrs/min as one would assume on a 68mm 

 

Dion knows a thing or two about tuning and wouldn’t just press on if something was wrong and clearly knows what a blocked exhaust looks and feels like on the Dyno 

 

I strongly believe this is just the best this combo has in it and the actual fact is the combo is wrong imho 

Link to comment
Share on other sites

  • Donating Members
  • Member For: 8y 6m 26d
  • Gender: Male
  • Location: Melbourne

Wow very efficient, 475 @ 18psi. Whats the Torque on that?@ arronm.

Dion didn't like the exhaust flow turning 90° out the external gate. Could be a factor. 

Restrictive cooler maybe.

Link to comment
Share on other sites

  • Dropping a turd
  • Gold Donating Members
  • Member For: 16y 5m 2d
  • Gender: Male
  • Location: Perth

Torque, dont know. 479rwkw   18psi tapering to 16psi at the top end

 

It ran out of pump as you can see. Simon backed off a bit and ended up with 472rwkw.

 

qE5PIC5.jpgMMgtvHX.jpg

Link to comment
Share on other sites

  • Dropping a turd
  • Gold Donating Members
  • Member For: 16y 5m 2d
  • Gender: Male
  • Location: Perth

This hub dyno reads within 5rwkw of the mainline chassis dyno it replaced. It was back to back tested when installed.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
  • Create New...
'