Jump to content

Fg mk2 turbo engine light- missfire issue


Nedl12

Recommended Posts

  • New Member
  • Member For: 5y 4m 7d

Hi guys, I not long brought a mk2 fg xr6 turbo and have a problem with the engine light..

 

The car has upgraded turbo, full exhaust, intercooler ect. It's making 366rwkw 

Before I brought the car, all the work and tune got done at horsepower factory and apparently right after the tune the engine light came up. The previous owner was told to change coils and plugs (20,000ks ago), he told me it fixed the problem for a while then it came back up again. The car was sold with me knowing about the light and how it didn't affect the car at all. Few months down the track the engine light will now flash and run horrible for 5 seconds then good again with the engine light staying lit. Its throwing codes P0301, 302, 303, 306 and 316, so I replaced coils and plugs along with regapping them to 0.8mm and it still hasn't helped at all. I just want to know if anyone has had a similar issue in the past as I dont want to waste money on parts that dont need replacing.

The car is only 60,000 ks old but does still have the stock vavle springs.. 

 

Any advice would be greatly appreciated, cheers.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
  • Create New...
'