Jump to content

Turbo Terri RWD conversion?


Terrorterri

Recommended Posts

  • less WHY; more WOT
  • Site Developer
  • Member For: 15y 11m 18d
  • Gender: Male
  • Location: Melbourne

that's quite interesting, as I wasn't going by redbook rather my own experience, but redbook appears to agree with ralphy. best way to get the correct answer to something is to post incorrect information :)@RHR has/had a RWD petrol territory turbo, but perhaps it was modified to be this way before he purchased it :idunno: (or my memory of what he said and how his car was propelled on a snowies cruise is incorrect - which is possible)

 

either way, my advice still stands, other than the fact you'd have to swap the motor for a RWD Petrol model to include a turbo motor for that scenario. So it's either swap an entire driveline (aside from motor) or sell/buy and swap motors.

Link to comment
Share on other sites

  • 4 months later...
  • Donating Members
  • Member For: 19y 2m 24d
  • Location: Perth
On 01/10/2018 at 8:50 AM, Terrorterri said:

Hey guys

 

thinking of converting my territory this turbo to rwd. Haven’t found any threads which seems like bad news but any info would be appreciated on whether or not this is even possible.

also whether it’s safe to do so. 

I've had 2 TTG's, now have a 2007 Territory TS RWD with a BTR 4 speed auto. Have fitted a built FG engine with FG turbo inlet, exhaust manifold, GTX3582R turbo, PW FG FMIC, fuel pump upgrade (Walbro 460), 4" dump, 5" cat, Manta twin 2.5" system. Makes 402rwkw on 98 fuel. 

 

I prefer the handling of the RWD, it's sharper than the AWD. The biggest challenge is finding a BTR that will hold together, I've found a trans builder in Perth that builds these trans with custom valve body modification, billet 2/4 servo, cryoed planetary gear sets. So far, so good. 

 

Apart from the twin exhaust tips the vehicle is a real sleeper but goes very well.

Link to comment
Share on other sites

  • Donating Members
  • Member For: 19y 2m 24d
  • Location: Perth

Bought a used low k NA FG engine and had it reconditioned with;

Spool conrods

CP Pistons

Turbo exhaust valves

Valve spring upgrade

Cylinder head reconditioned

Block machined

Head studs

 

Other parts fitted;

1000cc injectors

GTX3582R

Venom 4” dump & 5” cat

Manta twin 2.5” exhaust

Process West FG Stage 2 FMIC

Turbosmart Eboost2

Automac BTR 4 speed with custom converter

Turbo Territory front brakes

18” F6X rims

 

On my wish list is;

Shockworks suspension

Retrimmed seats including FPV GT-P front seats

Replace ICC with Android unit

Body and paint work.

  • Thanks 1
Link to comment
Share on other sites

  • less WHY; more WOT
  • Site Developer
  • Member For: 15y 11m 18d
  • Gender: Male
  • Location: Melbourne

sounds like you would be breaking driveshafts and CV joints often :)

 

I noticed the studs/nuts you've replaced the exhaust manifold bolts with... any link to those?

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.



×
  • Create New...
'