Jump to content

boost solenoid fail?


pdidily6401

Recommended Posts

  • 1 month later...
  • Member
  • Member For: 5y 8m 19d

and , update, car is running, took the opportunity to upgrade the turbo to the Garret gtx358 gen2,  dyno came out at 284rwkw, k and n panel filter works fine, am a happy camper, been a bit of a marathon so going to just drive it for a bit before starting the stage two upgrade of the spare head.

Link to comment
Share on other sites

  • less WHY; more WOT
  • Site Developer
  • Member For: 15y 11m 18d
  • Gender: Male
  • Location: Melbourne

well done :icon_ford:

 

on a side-note... you've probably got the lowest dyno figure for a GTX3584 gen2 turbo on one of these cars, so far :P

Link to comment
Share on other sites

  • 3 months later...
  • Member
  • Member For: 5y 8m 19d

ok, all done car running good on 10psi, noticed now sometimes when on WOT and then come off the pedal quick then go to reapply throttle the motor seems to have a flat spot like it is overfuelled or spark gone out , any ideas?, also partner said she saw a slight puff of grey white smoke when I got up it the other day .

Link to comment
Share on other sites

  • less WHY; more WOT
  • Site Developer
  • Member For: 15y 11m 18d
  • Gender: Male
  • Location: Melbourne

the fact that it's tuned means it'll be running a little bit leaner than normal so there'll be some extra emissions, so the puff of smoke is normal.

 

the flat spot is probably just something in the tune.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
  • Create New...
'