Jump to content

Soft Clutch - Mantic Stg1 HD twin plate


04LTRB

Recommended Posts

  • Member
  • Member For: 11y 5m 6d

Hey all , 

just a query my clutch has just been installed ( now 300kms old ) it seems to be very light , it’s a Mantic HD twin plate any ideas why this is or is it suppose to be light , also seems to grab close to the Top of the release ! 

Any Ideas ? 

Link to comment
Share on other sites

  • less WHY; more WOT
  • Site Developer
  • Member For: 15y 11m 19d
  • Gender: Male
  • Location: Melbourne

It depends what was installed along with the clutch, but a high-ish pickup is not that unusual. Often even heavy clutches feel light in a hydraulic system like this.

 

But you should be asking these questions of the people who installed it. 

Link to comment
Share on other sites

  • Dropping a turd
  • Gold Donating Members
  • Member For: 16y 5m 2d
  • Gender: Male
  • Location: Perth

My twin plate is very light, so that can be normal. Take up point is dependent on the thickness of the clutch plates.  Thicker and its closer to the floor.

Link to comment
Share on other sites

  • Member
  • Member For: 10y 5m 27d

It will feel very light as it’s brand new and the pressure plate is very close to max extension. As the clutch wears it will get slightly heavier. Also if it’s a 9000 series because the plates are large it won’t need as much pressure on the diaphragm to hold the power. The pickup point could be a number of things did they check for the correct crush on the slave cylinder and space the slave accordingly when installed?

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
  • Create New...
'