OZYWALKER XR50T Gold Donating Members 2,795 Member For: 10y 11m 18d Gender: Male Location: Western Sydney Posted 15/01/20 10:42 AM Share Posted 15/01/20 10:42 AM So pull the rocker cover off and drill/sand the farker down till it fits.Aeroflow/proflow same chinesium chit.Or if you really don't give a Fark hit it with oxy for a few seconds then bash the karnt on. 2 1 Link to comment Share on other sites More sharing options...
JETURBO ...JD TUNING ADELAIDE... Gold Donating Members 23,708 Member For: 15y 10m 19d Gender: Male Location: Adelaide Posted 15/01/20 10:46 AM Share Posted 15/01/20 10:46 AM ^^^ Honestly.... this ^^^ 1 Link to comment Share on other sites More sharing options...
espoig Donating Members 249 Member For: 9y 7m 14d Gender: Male Location: Mundaring Posted 15/01/20 12:44 PM Share Posted 15/01/20 12:44 PM They are absolute sh*t, bought them and then chucked em straight in the bin. Proceeded to buy another cover and weld on 2 -12 fittings instead much better idea 2 Link to comment Share on other sites More sharing options...
SIMBAD Donating Members 150 Member For: 12y 3m 8d Gender: Male Location: Tumut Posted 18/01/20 05:09 PM Share Posted 18/01/20 05:09 PM I used that same one. I chucked it in the freezer and had a few beers. Sat it in place, held a block of wood over the top of it and gave it a whack with a hammer. 1 Link to comment Share on other sites More sharing options...
bupalooga Silver Donating Members 255 Member For: 11y 6m 13d Gender: Male Location: Griffith NSW Posted 09/06/20 10:21 AM Share Posted 09/06/20 10:21 AM Figured I'd put my finished catch can setup in the thread.2x 20$ ebay cans for the separate lines. Should be all technically correct & legal but not exactly stealthy looking.This is the oil I've caught over the 1200km they've been installed.4ml from the front breather18ml from the back breather 5 Link to comment Share on other sites More sharing options...
arronm Dropping a turd Gold Donating Members 9,520 Member For: 16y 5m 23d Gender: Male Location: Perth Posted 09/06/20 11:22 AM Share Posted 09/06/20 11:22 AM You need a one way valve in the PCV circuit so you dont pressurize the catch can. Link to comment Share on other sites More sharing options...
bupalooga Silver Donating Members 255 Member For: 11y 6m 13d Gender: Male Location: Griffith NSW Posted 09/06/20 11:32 AM Share Posted 09/06/20 11:32 AM There's one in there, silver thingy hidden behind the dip stick 2 Link to comment Share on other sites More sharing options...
Romulus Donating Members 1,279 Member For: 19y 3m 15d Location: Perth Posted 09/06/20 11:45 AM Share Posted 09/06/20 11:45 AM How do you incorporate both breathers into one catch can so the system is still sealed I.e. doesn't vent to atmosphere. Link to comment Share on other sites More sharing options...
JETURBO ...JD TUNING ADELAIDE... Gold Donating Members 23,708 Member For: 15y 10m 19d Gender: Male Location: Adelaide Posted 09/06/20 10:15 PM Share Posted 09/06/20 10:15 PM Well done mate, it’s a pretty tidy set up Link to comment Share on other sites More sharing options...
Bulletime Donating Members 937 Member For: 13y 3m 10d Gender: Male Posted 21/06/20 12:20 PM Share Posted 21/06/20 12:20 PM This might be a stupid question but is it just for looks that everyone goes AN fittings everywhere including off the engine? I mean stock is pretty simple hose cable tied on, even on high boost engines... yet ppl say -10 to -12 or you’ll be in trouble with high boost?Also looks good epic amount of oil on the back breather, I definitely need to get around to installing mine Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now