Jump to content

TheChad90

Recommended Posts

  • Dropping a turd
  • Gold Donating Members
  • Member For: 16y 5m 1d
  • Gender: Male
  • Location: Perth

I've got twin plate will both plates custom xtreme ceramic.  Handles my 480rwkw and has never slipped. 

 

It copes all my abuse but isn't nice in traffic.  I drop the clutch at high rpm , lots of burnouts and clutch kick third.

 

If you don't drive like this go one ceramic and one organic.  Same as BAXRTUTE

 

I had this combo but killed it in under 1000ks 

 

Good luck

Edited by arronm
  • Like 1
Link to comment
Share on other sites

  • Dropping a turd
  • Gold Donating Members
  • Member For: 16y 5m 1d
  • Gender: Male
  • Location: Perth
9 hours ago, camo86T said:

I heard this jet guy can't drive manual? ;) 

 

+1 for NPC twin plate

Thought this was referring to me.  Didn't read it correctly .

 

6 hours ago, arronm said:

Yep, cant drive for sh*t....

Don't know if Jet can drive. I am just off my Ps.

Link to comment
Share on other sites

  • Silver Donating Members
  • Member For: 10y 1m 16d
  • Gender: Male
  • Location: SW Sydney

Na I know you're drifty mcdrift

 

8 hours ago, arronm said:

  I drop the clutch at high rpm , lots of burnouts and clutch kick third.

^^ evidence would be good though :)

Link to comment
Share on other sites

  • 4 weeks later...
  • To Loud
  • Gold Donating Members
  • Member For: 12y 3m 26d
  • Gender: Male
  • Location: WA, Perth

Well I have been meaning to get my clutch replaced for a while, but the stock factory is still working in my daily workhorse.

At First Monsta Torque were all "PRO" NPC gear. All Rob wanted to sell me was the NPC dual clutch.

Lighter than factory and hooks up well.

 

Recently I went back to get a quote and was advised that they no longer do NPC gear as the warranty issues they were having was not worth the time or effort.

Monsta Torque only do Mal wood gear now. I think that once my clutch dies, it will be off to get a new Mal wood option 3 clutch.

Link to comment
Share on other sites

  • ...JD TUNING ADELAIDE...
  • Gold Donating Members
  • Member For: 15y 9m 26d
  • Gender: Male
  • Location: Adelaide

Have a read about previous MW warranty issues 

 

I think @STAINLESS again plz Can chime in on his wonderful experience 

 

the fact is no clutch company will warrant anything except manufacturer defects as anyone with an ounce of brain should understand why that’s the case ;) 

Link to comment
Share on other sites

  • To Loud
  • Gold Donating Members
  • Member For: 12y 3m 26d
  • Gender: Male
  • Location: WA, Perth

yep, I read about it. at this point since it is my daily, I would prefer the smooth and quiet operation of the mal wood gear.

I just can't decide if I should stick with single or dual plate.

Link to comment
Share on other sites

  • Dropping a turd
  • Gold Donating Members
  • Member For: 16y 5m 1d
  • Gender: Male
  • Location: Perth
23 hours ago, masda74 said:

yep, I read about it. at this point since it is my daily, I would prefer the smooth and quiet operation of the mal wood gear.

I just can't decide if I should stick with single or dual plate.

Speak to XFT.   Last time I spoke to Simon he indicated he now uses a new range of clutches ( not sure what ) and getting good results.  

 

Said my clutch setup is old news. They don't do that anymore.  

 

No harm in asking. 

 

Just be realistic.  Tell him it's  a daily , the power and how you drive it 

  • Like 1
Link to comment
Share on other sites

  • The Toxic Rocket
  • Donating Members
  • Member For: 13y 11m 3d
  • Gender: Male
  • Location: Brisbane

I use the 1000hp rated NPC too. it's not too bad but I don't think it's the best clutch for daily. the pick up point and how hard it bites makes hill starts skid starts,

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
  • Create New...
'