Jump to content

How to install an Earls filter kit


My_XR6_Turbo

Recommended Posts

  • XR50T
  • Gold Donating Members
  • Member For: 10y 10m 28d
  • Gender: Male
  • Location: Western Sydney

I used some liquid telfon sealant, speed shops sell it.

As for not drilling the hole, look inside the banjo fitting they have alot of room open in them to allow flow from all around. You can't guarantee the hole will line up with the line end of the banjo anyway.

Link to comment
Share on other sites

  • Dropping a turd
  • Gold Donating Members
  • Member For: 16y 5m 2d
  • Gender: Male
  • Location: Perth

Easy once you have done a few.  And having  the correct 24mm tools. Just don't over tighten the tapered fitting into the block. And don't forget to an anneal the copper washers.

Edited by arronm
Link to comment
Share on other sites

  • less WHY; more WOT
  • Site Developer
  • Member For: 15y 11m 19d
  • Gender: Male
  • Location: Melbourne

and also an oil pressure sender on the end of the engine block adapter piece so a long socket doesn't fit over it.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
  • Create New...
'