Jump to content

Fg Offsets And Tyre Questions


Dillz

Recommended Posts

  • Dropping a turd
  • Gold Donating Members
  • Member For: 16y 5m 2d
  • Gender: Male
  • Location: Perth

Doing calcs now. To clear suspension I think +25 , but if you tell be the clearance you have from the rim to the strut and your current rim size I can work it out better. Be precise.

Edited by arronm
Link to comment
Share on other sites

  • Dropping a turd
  • Gold Donating Members
  • Member For: 16y 5m 2d
  • Gender: Male
  • Location: Perth

Forget the last bit then, lets hope others chime in with what they have fitted. The last thing you want is it to hit the strut and have to use spacers.

 

Have you read this whole thread to see what other members with 9.5 inch front , offset is. What about 8.5 or 9 front.

 

If you run the same size rim all round and no rubbing on the rear it needs to be 38 or 40. You cant run that on the front so need less offset , so maybe  then more lip on front. Will look stupid. You will need to contact supplier and see what blanks they start with.

Edited by arronm
Link to comment
Share on other sites

  • New Member
  • Member For: 5y 6m 23d

Yeah I’ve seen one guy running 9.5” +15 all around but the rears poked a bit and the fronts looked close as. Sadly Rota only make them in 9.5” :(

 

im thinking the +20 might be what I end up doing and then doing some trial and error with ride heights when I get coilovers

Link to comment
Share on other sites

  • Dropping a turd
  • Gold Donating Members
  • Member For: 16y 5m 2d
  • Gender: Male
  • Location: Perth

You need to check the front for the min offset and then run the same on the rear. Anything under +35 will rub like a bitch...on the rear

 

Maybe you can run +25 or even +30. I dont know. Its all about the front.

Edited by arronm
Link to comment
Share on other sites

  • Bronze Donating Members
  • Member For: 10y 3m 26d
  • Gender: Male
  • Location: Rockhampton Qld

Yea I don't think those pics you posted are 9.5+20.
I'd be going the 9.5+20 all round. They'll fit fine and might need a slight guard roll depending on how low you go and how wide the rubber you fit is

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
  • Create New...
'