Jump to content

Ba Xr6T 440Rwkw


boosted_XR

Recommended Posts

  • 3 years later...
  • Member
  • Member For: 15y 8m 13d

Recently made a few changes to the car. Now running a gtx4202 turbo, 6boost manifold, 60mm external gate, jonny tig 1800hp intercooler, walbro 460, surge tank with twin 044s, fpr1200, billet rail, 2000cc injectors, 4" into 3.5" exhaust, valve springs and billet oil pump gears.

 

Car made 495rwkw on e85 with a 2 speed powerglide. Tuned by Dyno-Mite Performance.

 

Previously had a 3582 with 66mm wheel, 0.7 cover and 44mm external gate. Made 430rwkw and ran 10.36@134mph. Sometime within the year I'll head out to the track and see how it all goes ?

  • Like 2
Link to comment
Share on other sites

  • 3 weeks later...
  • Member
  • Member For: 5y 3m 24d
  • Location: New zealand

@boosted_XR hi, did you have an external wastegate welded onto your stock turbine housing? Did it work out ok? Was it successful? I'm looking at doing it too to my fg housing, sounds like a tricky process, pre heating and post heating etc.

Link to comment
Share on other sites

  • Donating Members
  • Member For: 9y 5m 6d
  • Gender: Male
  • Location: Melbourne, VIC
On 18/01/2019 at 1:36 PM, boosted_XR said:

Previously had a 3582 with 66mm wheel, 0.7 cover and 44mm external gate. Made 430rwkw and ran 10.36@134mph.

 

Was this including all the other goodies you mentioned above and only the turbo upgraded from this?

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
  • Create New...
'