Spacebear New Member 12 Member For: 10y 22d Posted 17/10/15 08:28 AM Share Posted 17/10/15 08:28 AM HiIm looking at buying the stage 2.2 performance kit from process west.its costs $2250.I was wondering how much would this increase power by on a stock bf xr6turbo? I will obviously look at a tune straight after..I would like to make around 300..would I need bigger injectors? Or any other mods to run this kit? Apparently an actuator is a good idea.....not too sure.and if I get injectors,which ones would I have to get?I have a full straight through exhaust..do I really need a high flow cat?couldnt imagine they would do much...Any help would be awesome..thanks ??? Link to comment https://www.fordxr6turbo.com/forum/topic/91262-any-other-mods-needed/ Share on other sites More sharing options...
camo86T Silver Donating Members 1,810 Member For: 11y 5m 8d Gender: Male Location: SW Sydney Posted 17/10/15 09:52 AM Share Posted 17/10/15 09:52 AM Cop chip and u be sorted Link to comment https://www.fordxr6turbo.com/forum/topic/91262-any-other-mods-needed/#findComment-1565293 Share on other sites More sharing options...
Spacebear New Member 12 Member For: 10y 22d Posted 17/10/15 10:17 AM Author Share Posted 17/10/15 10:17 AM Ebay?and just any cop chip or undercover car cop chip? Link to comment https://www.fordxr6turbo.com/forum/topic/91262-any-other-mods-needed/#findComment-1565298 Share on other sites More sharing options...
PTR_NITRO_FG Donating Members 3,214 Member For: 12y 1m 24d Gender: Male Location: NOR Perth Posted 17/10/15 10:25 AM Share Posted 17/10/15 10:25 AM (edited) Normal cop chip for sure...Oh but seriously...read some of the threads in the 300rwkw Club... Edited 17/10/15 10:26 AM by PTR_NITRO_FG Link to comment https://www.fordxr6turbo.com/forum/topic/91262-any-other-mods-needed/#findComment-1565300 Share on other sites More sharing options...
Spacebear New Member 12 Member For: 10y 22d Posted 17/10/15 10:28 AM Author Share Posted 17/10/15 10:28 AM Where could I find one.theyr all for the e series falcons Link to comment https://www.fordxr6turbo.com/forum/topic/91262-any-other-mods-needed/#findComment-1565301 Share on other sites More sharing options...
Bizkets is Drunk? Too heavy needs boost Member 5,929 Member For: 11y 11m 14d Gender: Male Location: Adelaide Posted 17/10/15 10:29 AM Share Posted 17/10/15 10:29 AM Hahaha just the usual forum response. Lol. Please do not look up cop chip.Cooler, injectors, fuel pump, cat back exhaust, actuator should get you up to 300. If you know where you are going to get it tuned maybe have a chat with them and see what direction they point you in have a step back ask a few more questions and make a decision on what path you want to go down. What State are you in and what tuner are you thinking of getting to do the work? 1 Link to comment https://www.fordxr6turbo.com/forum/topic/91262-any-other-mods-needed/#findComment-1565302 Share on other sites More sharing options...
Spacebear New Member 12 Member For: 10y 22d Posted 17/10/15 10:32 AM Author Share Posted 17/10/15 10:32 AM Ah..well im in WA so maybe monster torque.but could I get away with just the intercooler kit and tune?or do I need cat,injectors,actuator? Link to comment https://www.fordxr6turbo.com/forum/topic/91262-any-other-mods-needed/#findComment-1565303 Share on other sites More sharing options...
PTR_NITRO_FG Donating Members 3,214 Member For: 12y 1m 24d Gender: Male Location: NOR Perth Posted 17/10/15 11:09 AM Share Posted 17/10/15 11:09 AM (edited) Confirm with Rob...when you say "straight through exhaust" does that mean you removed cat and replaced both mufflers with hot dogs or straight pipe? (Would be loud as f*ck if so). Would probably overboost as well if dump/cat has been altered.If you get a tune the injectors are definitely worth it....didnt think stock ones would go into the 300 zone? Rob will tell you to go with their 1000cc injectors....just in case you want more power down the track (and think they can get the car to idle better with those vs. The deka injectors).And didnt realise actuator was needed....again Rob will know Edited 17/10/15 11:12 AM by PTR_NITRO_FG Link to comment https://www.fordxr6turbo.com/forum/topic/91262-any-other-mods-needed/#findComment-1565306 Share on other sites More sharing options...
discostig Manual mode ________________________ All day, erryday Donating Members 13,798 Member For: 17y 7m 25d Gender: Male Location: Probably above atmospheric pressure Posted 17/10/15 11:21 AM Share Posted 17/10/15 11:21 AM Was about to post the same tip. Discuss it with your tuner and they will tell you what you need for your goals.No way stock injectors on a B series will go 300. I have 42lb Bosch "Green Top" 968 injectors and they top out around 330rwkw. Stock ones are like 29lb or something according to a quick google. Think they finish up about 260rwkw IIRC? Link to comment https://www.fordxr6turbo.com/forum/topic/91262-any-other-mods-needed/#findComment-1565310 Share on other sites More sharing options...
Spacebear New Member 12 Member For: 10y 22d Posted 17/10/15 11:42 AM Author Share Posted 17/10/15 11:42 AM Ahh sweet...and yeh its 3 inch straight through exhaust straight piped..sweet...would the tuning shops have parts like injectors available or do they only tune? Link to comment https://www.fordxr6turbo.com/forum/topic/91262-any-other-mods-needed/#findComment-1565315 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now